2005 Z51 Mil. Yellow North Jersey 33500 OBO
#1
Instructor
Thread Starter
Member Since: Oct 2007
Location: New Jersey
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
PRICE REDUCED!!! 2005 Z51 Mil. Yellow North Jersey 30kOBO
PRICE DROPPED!!! to 30k but taking offers...Just as the title states; She’s a babied Z51, 6 speed, '05 3LT with 16k on her. Never tracked with all the goodies... and then some. Tried to see if she could stay, but things got hard and must now consider letting her go… She's got Bose Stereo, Onstar, Navigation, HUD and a few extras...
Those being:
160 degree t-stat
Kooks 1.75 coated headers
Kooks coated low restrictive cats a and cross pipe
Corsa Sport quad tip exhaust
Vararam CAI
Callaway short throw shifter
Cartek Stage 4X heads includes full porting of heads, intake, exhaust, and combustion chamber. New custom stainless valves, 2.02 intake, 1.57 exhaust, seals, comp 921 springs, spring seats, seals, titanium retainers, milled .030, and fully cleaned with assembly.
Custom ground Cartek 2X cam.
Cromoly hardened push rods.
Cometic heavy duty head gaskets.
Ported FAST intake to stage 2X.
Miscellaneous parts, gaskets, bolts, fluids, etc.
Tuning (ECU reprogram). By Julio himself...
Notching the pistons for clearance.
ASP under drive pulley with belts.
Seimens 60lb. injectors
Cartek ported Fast 90mm intake.
New A/C delco professional battery
She does 494 HP and 438TQ (TO THE REAR WHEELS...)
Can do more when the vararam's effect is taken into account.
She's mint... Millennium Yellow with Comp Grey original factory rims.
I have all the paperwork on her including build sheet, laminated dyno sheet and title in hand,
$33,500.00 or B.O. PRICE REDUCED 30000.00 OBO
Never had any problems, always cared for.
Check out the newly added pics and video...
Thanks
The Heart of the Beast
Brushed aluminum radio and climate control ***** together with Callaway short throw shifter with brushed ****
15,626mi as of 6/26/09now has about 16k as of 7-22-09
Custom made leather center console cover
Notice the Red powder coated calipers
Click on the link below to see what almost 500 hp to the rear wheels is like... (Custom tuned by Julio of CARTEK himself... don't forget to turn the volume up)
http://www.youtube.com/watch?v=sQWzWGUFAV0
This is my baby. I hate to have to do this so please, no insults with low-ball offers. Thanks for looking.
Those being:
160 degree t-stat
Kooks 1.75 coated headers
Kooks coated low restrictive cats a and cross pipe
Corsa Sport quad tip exhaust
Vararam CAI
Callaway short throw shifter
Cartek Stage 4X heads includes full porting of heads, intake, exhaust, and combustion chamber. New custom stainless valves, 2.02 intake, 1.57 exhaust, seals, comp 921 springs, spring seats, seals, titanium retainers, milled .030, and fully cleaned with assembly.
Custom ground Cartek 2X cam.
Cromoly hardened push rods.
Cometic heavy duty head gaskets.
Ported FAST intake to stage 2X.
Miscellaneous parts, gaskets, bolts, fluids, etc.
Tuning (ECU reprogram). By Julio himself...
Notching the pistons for clearance.
ASP under drive pulley with belts.
Seimens 60lb. injectors
Cartek ported Fast 90mm intake.
New A/C delco professional battery
She does 494 HP and 438TQ (TO THE REAR WHEELS...)
Can do more when the vararam's effect is taken into account.
She's mint... Millennium Yellow with Comp Grey original factory rims.
I have all the paperwork on her including build sheet, laminated dyno sheet and title in hand,
$33,500.00 or B.O. PRICE REDUCED 30000.00 OBO
Never had any problems, always cared for.
Check out the newly added pics and video...
Thanks
The Heart of the Beast
Brushed aluminum radio and climate control ***** together with Callaway short throw shifter with brushed ****
15,626mi as of 6/26/09now has about 16k as of 7-22-09
Custom made leather center console cover
Notice the Red powder coated calipers
Click on the link below to see what almost 500 hp to the rear wheels is like... (Custom tuned by Julio of CARTEK himself... don't forget to turn the volume up)
http://www.youtube.com/watch?v=sQWzWGUFAV0
This is my baby. I hate to have to do this so please, no insults with low-ball offers. Thanks for looking.
Last edited by Gdemoman; 08-03-2009 at 05:33 PM. Reason: price reduced
#9
Instructor
Thread Starter
Member Since: Oct 2007
Location: New Jersey
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
#14
Racer
Member Since: Feb 2009
Location: St.Paul Minnesota
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
DAMMM!! How come I haven't seen this one for sale yet??? For what you have in the car, that a very good price to put it at... BTW, did you do anything to the tranny???? Must be pretty hard on the tranny since it's an 05....
#15
Instructor
Thread Starter
Member Since: Oct 2007
Location: New Jersey
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
My next move was going to be 4:10's , rear end, and hardened drivers and passenger output shaft. Spinmonster, Dave and the guys at CARTEK all recommended that move "IF" I was going to race the car (which I never did). The clutch, trannny, and the rest was good... But my situation changed and here I am... She's a real good car, like I said VERY well taken care of, NEVER beat up on, and a real quick...
#20
Instructor
Thread Starter
Member Since: Oct 2007
Location: New Jersey
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
I don't know what a GMVIS is but the car does have a clean carfax. But allow me to clarify... The rear end work that I was going to do was "NOT" necessary. It would have been something I may have wanted to do to get the car race ready, and give her even more power. The car is is prime condition with "NO" problems whatsoever. Now, If I was going to have CARTEK do the rear end work, I think it would have been between 3-4k to do but again this would've been strictly done as a mod,like the headers, exhaust etc.. Not as a necessity...