2006 a6/z51/fast/tea/kooks - fs

[JayplaySS2]

** $29,900 ** I am considering selling the damn car that I just finished. I don't have any other plans but I am just not driving it and the 2 payments are a killer. Let me know if you guys are interested. 2006 A6 Z51 3LT HUD Heated Seats Polished Wheels Silver w/Black and Grey interior I have had it just over a year and I bought it totally stock from a Dentist. I have done all the mods for you. Car is wicked quick. Vararam CAI Vararam TB spacer Ported Throttle Body 160 stat Spin Ported FAST 92 Kooks 1 7/8's w 3 x 3 off road - no cats Stock Mufflers ( nice and quiet ) TEA Stage 2 LS2 CNC'd heads (325/257) 63cc Vengeance cam 224/235/610/620/115 Idles perfect Patriot Dual valve springs Harland Sharp 1.7 rockers UD pulley ARP Head bolts GM MLS Head Gaskets Summit Ported MAF Smooth Couplers Chuck COW A6 tune (I was the one who made the DIY write up) BFG KDW's 85% Front and 50% Rear COW/Vengeance mail order tune It is on a mailorder tune for now and I have not had it dynoed since I keep adding mods, it's an addiction. I am confident it should put down 470-480rwhp. The original owner replaced the Front and Rear brake pads and Z51 rotors right before I bought it. They have 3K on them now. I bought the car with 37K on it and it sits right now (6/21) with 41,890. I just took it to the Keys this weekend, my birthday was the 28th and it made the 3hr trip with no drama, not a hick-up. I have also driven it to Ocala ( 4hrs north ) with zero issues. I would drive it anywhere. Everything works perfect. Not a single issue. There is one small scratch on the driver rear fender that can't even be seen unless you up on it. I will try to get a close up pick in the next day or so. I owe $29K on it through Toyota Financial and I must get ** $29,900 ** Cam Idle http://s48.photobucket.com/albums/f2...t=MVI_2103.flv Link to my Photobucket page to see them all. http://s48.photobucket.com/albums/f2...ySS/?start=all

[JayplaySS2]

Bump

[TragicTA]

Where are you located & do you have any close up pictures of that scratch on the fender and drivers seat?

I take it you are using the stock Connecting rods and pistons?

[JayplaySS2]

Originally Posted by TragicTA

Where are you located & do you have any close up pictures of that scratch on the fender and drivers seat?

I take it you are using the stock Connecting rods and pistons?

I'm located in Ft. Lauderdale, FL and working nights some this week so I will get a pic of the scratch and the driver seat in a day or so for you.

The shortblock is stock.

[JayplaySS2]

Originally Posted by TragicTA

Where are you located & do you have any close up pictures of that scratch on the fender and drivers seat?

I take it you are using the stock Connecting rods and pistons?

Works been very busy, though that's a good thing.

[JayplaySS2]

Here are a few more. The 1st one from the Keys last weekend, car was a blast. Due to an accident on the one bridge leading in and out of the Keys, we were stuck on this damn bridge for over an hour. BTW, I never even take the top off, never.



Fronts are about 80-85%



Rears are about 50%



I also have the C6R skull sticker on the fender and I removed the GM decals/emblems near the rear wheels.

[JayplaySS2]

My neighbor just got an 09 RT Challenger today, look at the size difference compared to my C6 beside it.

[JayplaySS2]

Bump

[JayplaySS2]

Ttt

[BartonekDragRacing]

beautiful C6!!

Originally Posted by TragicTA

I take it you are using the stock Connecting rods and pistons?

it will last for a LONG time with that setup.

[JayplaySS2]

Originally Posted by BartonekDragRacing

beautiful C6!!



it will last for a LONG time with that setup.

Thanks man

[stepuptata]

Originally Posted by JayplaySS2

My neighbor just got an 09 RT Challenger today, look at the size difference compared to my C6 beside it.

yeah...them things are tanks!

[JayplaySS2]

Just added a set of Harland Sharp 1.7 Non-adjustable rockers, great mod might I say.

Few pics -








I am just going to keep adding mods until it gets where I want it to be (550rwhp N/A from a stroker) or it sells.

Perfect street manners with the cam but be prepared to steer with your life on the line on WOT. No for the average Vette guy who buys a CAI and a tune.

[FLC6]

I want to see dyno numbers AND 1/4 mile trap speed.

[JayplaySS2]

Originally Posted by FLC6

I want to see dyno numbers AND 1/4 mile trap speed.

Me too but work is way too crazy to get it done right now. I have been trying to get a dyno tune to work with my schedule for the last month.

[JayplaySS2]

Bump -

[fstws6]

This makes me think twice about getting a 02-04 Z06.

[JayplaySS2]

Originally Posted by fstws6

This makes me think twice about getting a 02-04 Z06.

If you're local, come check it out. I'll let you get on it, the car is pretty crazy, even compared to my KB Cobra.

[blackbird00]

Im not sure if jay remembers me but he is a real stand up guy, I first met him on LS1 tech a few years ago, Very honest and knows his stuff about cars. This is a hell of a deal with an awsome setup.

I can vouch that who ever gets this won't regret it.. Free bump.

[JayplaySS2]

Originally Posted by blackbird00

Im not sure if jay remembers me but he is a real stand up guy, I first met him on LS1 tech a few years ago, Very honest and knows his stuff about cars. This is a hell of a deal with an awsome setup.

I can vouch that who ever gets this won't regret it.. Free bump.

Yea man, I remember you. Thanks for the kind words and the bump. Hope things are well with you.