You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Corvetteforum.com today!
I looked up the Carvaggio Full Leather Race Seat in their PDF Sales Brochure but the Price Seems to be missing a digit ($1, 95). Could you pm me a price for the Alcantara version?
Seems like an attractive option since they are a direct replacement for the factory seat working on the stock seat rail. Im sure fixed brackets are much safer, but the stock rails allow for electronic movement, etc.
If you had to use a 6-point harness, what are the options for attaching the bottom two belts that come up through your legs without connecting it to a fixed bracket?
If you're going to use a 5 or 6 point harness for track events you need seats that have belt routing holes in them so the lap belts fit snugly over your lap when tightened. Belts that come over the front and or sides of the seats should not pass a tech inspection at a track event.
I have Suzuka Pro Fits in my Wife's car on fixed Hard Bar mounts. The seats are FIA approved and require no seat back brace. They have the provisions for all belts and I route the lap belts through the side holes under my thighs when I am sitting and then up in between my legs to connect to the cam lock. I used Team Tech harnesses with the 2" Hans shoulder strap provision. The shoulder straps hang from a Brey Krause harness bar. Install was simple and they fit great.