[ZR1] 10.90 yesterday with only drag Radials
#1
Burning Brakes
Thread Starter
10.90 yesterday with only drag Radials
First time out with the car, beside the 90 degree weather at atco raceway everything was great, got the 60ft down to a 1.63, and a mph of 129, i really want to go back when its cooler and hopefully get some low 10 second passes, dont know how much longer i could go tho with leaving it stock though
#2
The Consigliere
Member Since: May 2006
Location: 2023 Z06 & 2010 ZR1
Posts: 22,252
Received 5,447 Likes
on
2,272 Posts
Pretty decent et considering 90 degree heat. Any idea what your DA was?
Sounds like some solid runs.
Sounds like some solid runs.
#3
Burning Brakes
Thread Starter
#4
The Consigliere
Member Since: May 2006
Location: 2023 Z06 & 2010 ZR1
Posts: 22,252
Received 5,447 Likes
on
2,272 Posts
#5
Burning Brakes
Thread Starter
#9
Le Mans Master
EVERY 10 degrees warmer out that car is going to slow down .10. So say 1.63 60ft on a nice cold day say 50degrees would be a 10.50. Then add 40degrees he is SPOT ON!!! Great driving, great 60ft great results. MAKE the ZR1 guys proud!!!!
#13
Burning Brakes
Thread Starter
#14
Burning Brakes
Thread Starter
#16
Former Vendor
Member Since: May 2001
Location: Callaway Cars - Old Lyme, Connecticut
Posts: 6,125
Received 738 Likes
on
419 Posts
First time out with the car, beside the 90 degree weather at atco raceway everything was great, got the 60ft down to a 1.63, and a mph of 129, i really want to go back when its cooler and hopefully get some low 10 second passes, dont know how much longer i could go tho with leaving it stock though
Nice pass!
Were they enforcing the "roll bar" requirement? When we were there on Friday, they asked us "to run slower" They actually said, roll bars were required for cars faster than an 11.5
We went 10.8 @ 128 mph. Here's our thread from the other day:
http://forums.corvetteforum.com/c6-c...0-mi-w-in.html