upgraded cam with Z06 stock exhaust
#1
Racer
Thread Starter
upgraded cam with Z06 stock exhaust
Wondering if anyone has upgraded their cam (BTR2 or similar) on Z06 but kept stock exhaust. I know headers would add some HP, but the stock Z06 exhaust (especially on 2011) is actually very good.
For those that may have upgraded cam, but not installed headers, what was the outcome and did you add headers later, etc?
For those that may have upgraded cam, but not installed headers, what was the outcome and did you add headers later, etc?
Last edited by Jaybird29; 10-24-2019 at 11:33 AM.
#2
Safety Car
Member Since: Aug 2009
Location: Chester County Pennsylvania
Posts: 4,999
Received 794 Likes
on
538 Posts
2020 C5 of the Year Finalist - Unmodified
I am running AHP heads, milled .030 with “race porting” with an HPA Stage 2 cam, good idle, no surge, with an Airaid CAI and full stock exhaust. Car made 552 RWHP with 501 torque.
The following 3 users liked this post by Too-Fast:
#3
Team Owner
Plenty of CA guys have been doing it for years in an attempt to appear smog legal. Just a couple examples...
https://www.corvetteforum.com/forums...g-package.html
https://www.corvetteforum.com/forums...m-552rwhp.html
https://www.corvetteforum.com/forums...g-package.html
https://www.corvetteforum.com/forums...m-552rwhp.html
The following users liked this post:
American Heritage (10-24-2019)
#4
Former Vendor
We have done plenty of LS7 stock manifold/exhaust setups. With the correct cam it can work really well. With the wrong cam, you will hate it.