[ZR1] Got Meth?
The following users liked this post:
Detoxx03 (12-25-2017)
#4
Le Mans Master
Snow is junk. Had it and had multiple failures. Switched to alky control and have had no issues. Make sure you run pure meth and it barely does anything for cooling IAT2s but it does add octane
The following users liked this post:
Detoxx03 (12-25-2017)
#5
Pro
Call Julio at Alky Control.
I have talked with Jeff Snow at length and many years ago his systems and AEM's were actually quite good. It seems quality has fell off over the years.
I have talked with Jeff Snow at length and many years ago his systems and AEM's were actually quite good. It seems quality has fell off over the years.
#6
Racer
kind of apples to oranges, but I ran a Devil's own kit on my Turbo VW and loved to see the iats jump down below ambient when the kit turned on.... I ran a 50/50 mix with distilled water....70* iats were cool to see when it was 100*+ outside
Last edited by Sean_C; 10-26-2017 at 09:47 AM.
#7
Le Mans Master
wouldn't adding water to the mixture help with lowering the iats?....I'm sure it takes away from some of the octane bump though.
kind of apples to oranges, but I ran a Devil's own kit on my Turbo VW and loved to see the iats jump down below ambient when the kit turned on.... I ran a 50/50 mix with distilled water....70* iats were cool to see when it was 100*+ outside
kind of apples to oranges, but I ran a Devil's own kit on my Turbo VW and loved to see the iats jump down below ambient when the kit turned on.... I ran a 50/50 mix with distilled water....70* iats were cool to see when it was 100*+ outside
#8
Racer
#9
Le Mans Master
Originally Posted by whatcop?
Yes it would but water isn't compressible and you can't send it through the rotors without damaging them
#10
Le Mans Master