[Z06] I'm getting a new LS7 apperently ...
#1
Pro
Thread Starter
I'm getting a new LS7 apperently ...
Turns out my low idling oil pressure was due to a bad main bearing. The service writer said they " didn't like what they found" when they went into the engine. He didn't seem too knowledgable so I m going in to talk to the tech on Monday. He was the one who supposedly lobbied for me to have a new one put in. I wonder what he found. Do I care ? My new engine arrived Friday. Maybe this one has magic valves.
MC
MC
#3
Welcome to the New LS7 club. Mine had 30K miles and dropped a valve. Should be getting it back Monday, hopefully.
#7
Safety Car
#8
Do you have the TSB detailing this? I don't think the dealer is replacing my sump. I'd like to know the TSB# so I can have the dealer look it up.
#9
Team Owner
#10
Pro
Thread Starter
#11
Race Director
#12
Advanced
Turns out my low idling oil pressure was due to a bad main bearing. The service writer said they " didn't like what they found" when they went into the engine. He didn't seem too knowledgable so I m going in to talk to the tech on Monday. He was the one who supposedly lobbied for me to have a new one put in. I wonder what he found. Do I care ? My new engine arrived Friday. Maybe this one has magic valves.
MC
MC
#14
Race Director
#15
Pro
Thread Starter
#17
Race Director
and yet the owners manual says no problem at idle until 7 PSI, great guidance from GM.
#18
Just drove my 09 with a new motor home from the dealer. 185 degree oil temp, 22 PSI idle. Cold start idle was 64 psi @ 70 degree oil temp. and now I need a new battery...
#19
Race Director
Congrats on the new engine and good luck with it in the future.