[Z06] Great offers: WCCH-X Heads...FREE! Details inside!!!
#1
Former Vendor
Thread Starter
Great offers: WCCH-X Heads...FREE! Details inside!!!
Luke just whispered something crazy into my left ear...you guys want to hear it?
He said that he would INSTALL our new WCCH X-HEADS for FREE!!! Yes FREE for the first 10 customers.
• If you purchase our cam/intake/heads/exhaust/halltech package. WCCH-X Heads install is Free.
• Already have exhaust. $300 OFF Heads install
• Already have one of OUR cams. $300 OFF Heads install
• Already have exhaust and our cam. $300 OFF Heads install
• Already have it all and except heads. $300 OFF Heads install
• If you purchase the entire cams/heads/fast/clutch/halltech/exhaust package. Heads installed is FREE plus FREE billet fuel rails
• Pretty much, the less you have the more you save…LOL
Note: If your goal is to make between 590 and 610rwhp on pump gas, then you MUST choose either the Panther or Widow cam and springs kit. No extra for additional compression
I told Luke that he was crazy and his reply was: “hey man, it’s almost Xmas, this new package is breaking new grounds so why not go off”. So I said, okay, I’ll do it.
We understand that Xmas is around the corner and perhaps for many folks budget has been allocated towards other priorities. Therefore, if you lock up on any of the packages above with at least a 20% down payment, the pricing will be locked for you until you’re ready to fully jump in.
So there you have it guys….now it’s your turn!!!
Thanks,
Carlos
He said that he would INSTALL our new WCCH X-HEADS for FREE!!! Yes FREE for the first 10 customers.
• If you purchase our cam/intake/heads/exhaust/halltech package. WCCH-X Heads install is Free.
• Already have exhaust. $300 OFF Heads install
• Already have one of OUR cams. $300 OFF Heads install
• Already have exhaust and our cam. $300 OFF Heads install
• Already have it all and except heads. $300 OFF Heads install
• If you purchase the entire cams/heads/fast/clutch/halltech/exhaust package. Heads installed is FREE plus FREE billet fuel rails
• Pretty much, the less you have the more you save…LOL
Note: If your goal is to make between 590 and 610rwhp on pump gas, then you MUST choose either the Panther or Widow cam and springs kit. No extra for additional compression
I told Luke that he was crazy and his reply was: “hey man, it’s almost Xmas, this new package is breaking new grounds so why not go off”. So I said, okay, I’ll do it.
We understand that Xmas is around the corner and perhaps for many folks budget has been allocated towards other priorities. Therefore, if you lock up on any of the packages above with at least a 20% down payment, the pricing will be locked for you until you’re ready to fully jump in.
So there you have it guys….now it’s your turn!!!
Thanks,
Carlos
#6
Former Vendor
Thread Starter
#7
Former Vendor
Thread Starter
#9
Melting Slicks
Not in your area, what type of pricing could you provide on the heads alone for me to install? I would want stock TI intake valves, stainless exhaust, bronze guides. I assume thats a pretty standard setup. Exchange basis or do I have to send mine in?
Shoot me a price if you would with and without springs. Thanks!
Shoot me a price if you would with and without springs. Thanks!
#10
Former Vendor
Thread Starter
Not in your area, what type of pricing could you provide on the heads alone for me to install? I would want stock TI intake valves, stainless exhaust, bronze guides. I assume thats a pretty standard setup. Exchange basis or do I have to send mine in?
Shoot me a price if you would with and without springs. Thanks!
Shoot me a price if you would with and without springs. Thanks!
Mr. Atljar,
The pricing on the heads are $1550 completely done shipped back to you and ready for installation.
All you have to do is go here:
http://www.theair-charger.com/wcst2cncpohe.html
You'll ship the heads straight to WCCH with an assigned P.O. # provided by us. This P.O # is very important because it will provide all the information needed in terms of mods for your heads.
If you have any furthre questions, please feel free to call me direct at:
214-491-8314.
Thanks,
Carlos
#12
Former Vendor
Thread Starter
#13
Former Vendor
Thread Starter
Foshizo
Here are some sounds:
Street Bully: (a step over stock)
Cam kit: $735.95 Sale: $690.95
http://www.youtube.com/watch?v=J3VDromnpBo
http://www.youtube.com/watch?v=Cugc2...eature=related
Black Mamba: (Mid level cam)
Cam kit: $765.95 Sale: $720.95
http://www.youtube.com/watch?v=1v8HhvHkFvE
Black Widow: (Racy cam)
Cam kit: $765.95 Sale: $720.95
http://www.youtube.com/watch?v=3jTKNx3zgFc
http://www.youtube.com/watch?v=O0me8EBOU6s
http://www.youtube.com/watch?v=L3QvP7AkZjc
Black Widow (Revised…668rwhp) on E85 and high CR: (ONLY for the serious)
Cam kit: $765.95 Sale: $720.95
http://www.youtube.com/watch?v=LqFePY5Bpt0
Macho cam on E85: (Racy cam with attitude)
Cam kit: $765.95 Sale: $720.95
http://www.youtube.com/watch?v=Lo3j4V0mM4k
Black Mamba on E85:
http://www.youtube.com/watch?v=c6D5K..._order&list=UL
Black Mamba in action:
http://www.youtube.com/watch?v=8FrE9...eature=related
http://www.youtube.com/watch?v=Hmrdc...eature=related
http://www.youtube.com/watch?v=N6Qe1BcrshY
Lucifer cam: In action (Racy and only if you dare)
http://www.youtube.com/watch?v=BIwxkWpEcKo
Thanks,
Carlos
#16
Team Owner
Member Since: Apr 2001
Location: Elmhurst, IL (West Suburb of Chicago) & Home of MEGA Horsepower
Posts: 26,714
Received 584 Likes
on
399 Posts
St. Jude Donor '06
Mr. Atljar,
The pricing on the heads are $1550 completely done shipped back to you and ready for installation.
All you have to do is go here:
http://www.theair-charger.com/wcst2cncpohe.html
You'll ship the heads straight to WCCH with an assigned P.O. # provided by us. This P.O # is very important because it will provide all the information needed in terms of mods for your heads.
If you have any furthre questions, please feel free to call me direct at:
214-491-8314.
Thanks,
Carlos
The pricing on the heads are $1550 completely done shipped back to you and ready for installation.
All you have to do is go here:
http://www.theair-charger.com/wcst2cncpohe.html
You'll ship the heads straight to WCCH with an assigned P.O. # provided by us. This P.O # is very important because it will provide all the information needed in terms of mods for your heads.
If you have any furthre questions, please feel free to call me direct at:
214-491-8314.
Thanks,
Carlos
#17
Former Vendor
Thread Starter