[Z06] Need a Set of track wheels? 18" F14's Instock 877-361-0296
#1
Former Vendor
Thread Starter
Member Since: Apr 2005
Location: CT, NY, NJ North East
Posts: 2,015
Likes: 0
Received 1 Like
on
1 Post
Need a Set of track wheels? 18" F14's Instock 877-361-0296
Hey guys does anyone need a track car setup for your Z06? I have two sets of Forgestar F14's in 18" sizes that weight under 21lbs. Check it out:
D2AUTOSPORT.com
877-361-0296
sales@d2autosport.com
2 Sets F14 Titanium Grey $1275.00 Shipped (Special)18x11 Front & 18x12 Rear
YOU CAN: Click below to
________________________________________ _________________
D2AUTOSPORT.com
877-361-0296
sales@d2autosport.com
2 Sets F14 Titanium Grey $1275.00 Shipped (Special)18x11 Front & 18x12 Rear
YOU CAN: Click below to
________________________________________ _________________
Last edited by D2-AUTOSPORT; 03-01-2011 at 05:15 PM.
#3
Former Vendor
Thread Starter
Member Since: Apr 2005
Location: CT, NY, NJ North East
Posts: 2,015
Likes: 0
Received 1 Like
on
1 Post
I would agree, shown is a 18x9.5 F14:
Looking at this image I would say Forgestar could be a little on the low side with their weight estimate. I would say the front wheel will be 21 and the rear 22.5. Still light as hell, lmao
Looking at this image I would say Forgestar could be a little on the low side with their weight estimate. I would say the front wheel will be 21 and the rear 22.5. Still light as hell, lmao
#7
Safety Car
Could you do a set in gunmetal at that price?
..and is there a proper 18x10 offset front wheel instead, don't want to rub the heck outta my brake duct setup
..and is there a proper 18x10 offset front wheel instead, don't want to rub the heck outta my brake duct setup
Last edited by Rob Willis; 03-30-2011 at 03:04 PM.
#9
Safety Car
I've already got a few different quotes from other vendors.
Thanks!
Rob Willis
rwillis@yahoo.com
#15
Race Director
If you have another deal like this, shoot me a PM. I'll be first in line.
#18
Race Director
Something like what you had offered above. I've got a C5 that has been flared on all four corners and has C6Z brakes, so the package above is perfect assuming it's for C6Z06 fitment. Actually all I REALLY need is 18x12+ rears. These will strictly be for racing, so finish is not really important and cosmetic flaws are irrelevant if the price was low enough.