[Z06] Factory GM ZR1 Carbon Fiber Roofs available
#1
Supporting Vendor
Thread Starter
Member Since: Nov 2005
Location: Supporting the Corvette Community at Abel Chevrolet in Rio Vista, CA 707-374-6317 Ext.123
Posts: 14,498
Received 1,425 Likes
on
597 Posts
St. Jude Donor '08
Factory GM ZR1 Carbon Fiber Roofs available
I have access to get the factory GM Carbon Fiber roofs finally. I have already sold one to a customer and if anybody else needs them, PM or call the number in my avatar. Prices can't be beat anywhere on the forum. I am about $200-$300 cheaper then any other forum vendor for these factory GM roofs. Price is $3750 for both the roof and the halo panel. Additional hardware like bolts and such is a few more bucks.
RICH
RICH
Last edited by RichieRichZ06; 05-26-2009 at 08:01 PM.
#4
Supporting Vendor
Thread Starter
Member Since: Nov 2005
Location: Supporting the Corvette Community at Abel Chevrolet in Rio Vista, CA 707-374-6317 Ext.123
Posts: 14,498
Received 1,425 Likes
on
597 Posts
St. Jude Donor '08
RICH
#9
Premium Supporting Vendor
Word on the street is 7lbs for roof and roof bow combined. Maybe RichieRich can verify.
#11
Supporting Vendor
Thread Starter
Member Since: Nov 2005
Location: Supporting the Corvette Community at Abel Chevrolet in Rio Vista, CA 707-374-6317 Ext.123
Posts: 14,498
Received 1,425 Likes
on
597 Posts
St. Jude Donor '08
RICH
Last edited by RichieRichZ06; 05-27-2009 at 06:32 PM.
#16
Supporting Vendor
Thread Starter
Member Since: Nov 2005
Location: Supporting the Corvette Community at Abel Chevrolet in Rio Vista, CA 707-374-6317 Ext.123
Posts: 14,498
Received 1,425 Likes
on
597 Posts
St. Jude Donor '08
I still have not received the CF parts yet, so no answer on weight savings just yet. I will post them as soon as I find out.
RICH
#18
Drifting
Member Since: Sep 2004
Location: North Carolina
Posts: 1,939
Likes: 0
Received 0 Likes
on
0 Posts
#19
Race Director
Just pull the headliner down and it is a few bolts around the perimeter of the roof frame. I have had Z06 customers drive around roof-less while waiting on getting one painted for the recall a while back.
I still have not received the CF parts yet, so no answer on weight savings just yet. I will post them as soon as I find out.
RICH
I still have not received the CF parts yet, so no answer on weight savings just yet. I will post them as soon as I find out.
RICH
#20
Drifting
Do a search. There are several threads here that detail the process. Just remember, you'll have a fair amount of flex in your chasis when you have the top out.