0HinsonSuperCars

Hinson Motrosports is proud to bring the C6 and C6 Z06 Corvette market the first set of MADE IN AMERICA, stainless steel, ceramic coated 1 7/8 headers for under $800.00 shipped to the lower 48 states. The headers are all mandrel bent with 1 7/8" primary tubes, 3/8" thick flanges, and 3" collectors. Also, all of our headers and x-pipes are ceramic coated to help reduce heat under the hood and the interior of the car. Our headers slide in to place without the need to loosen the engine mounts or the front crossmember. Installation time is short and can be done easily from below the car. Fitments currently available for the C6 wet and dry sump models with off road connections only.

*Expect to see gains of 25rwhp or more from the addition of these headers with a tune.

Price Includes & is Valid Through July 5, 2015

• Ceramic Coated Stainless Steel Headers
• Ceramic Coated Stainless Steel X-pipe (Select your vehicle)
• Stainless steel rear axle back connection pipes
• O2 Sensor Wire Extensions (x2) $50 value
• Clamps

Click Here For Prices & Purchasing

0HinsonSuperCars

Ceramic coating is FREE on the headers and the x-pipe.

blueyeszr1

May be time for headers, do you offer cats with any of the x pipes?

0HinsonSuperCars

There is room to weld in cats in our x-pipe, but the catted versions will not be available until later this summer.

0HinsonSuperCars

In stock and ready to ship.

0HinsonSuperCars

Going fast. Grab your set today.

0HinsonSuperCars

FREE ceramic coating.

Phantom Blur

How much do you project the catted version to come in at? (TX emissions). Typical turnaround time from order drop to ship?

Burlbark

I could use a catted set that would bolt in place on my npp 08 exhaust.

0HinsonSuperCars

We don't have a price point on the catted versions and won't for a little while. Once we release the product they will be in stock, so shipping will be fast.

They should be available in weeks to come.

Phantom Blur

Thanks Chris. Insane wreck ya'll had a few years back at the Texas Mile with that 230 mph Z06!

I'll be watching for your catted product!

0HinsonSuperCars

Yea we got tossed around like clothes in a dryer when the tire blew. The great thing about it is we walked away from it injury free. Very lucky on that one.

0HinsonSuperCars

Bump.

Speedforhire

Do you offer a set for an '09+ LS3 A6 car with a 3" x-pipe for use with Z muffs on a GS car?

Speedforhire

I went to your website to spec a set (and some other items) and didn't find a full 3" setup for a 2013 GS A6 car.

0HinsonSuperCars

We are in the final stages of production on the late C6 setup. It will be available in about 6 weeks or so.

0HinsonSuperCars

Installs without removing the steering rack, or lowering the front cradle.

Phantom Blur

Hey Chris, I'm one of those late C6 guys (13 Grand Sport). Six weeks for a configuration for us (catted too) absolutely works. Do me a favor and PM me when all systems are go.

greatgonzer

Very cool and at a great price.... You have me thinking now

Cherokee Nation

Why do you not have 1 3/4 ?..They are a big part of the market..