When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Do you have an updated price list for all your alternators?
I've been meaning to start a new thread and struggled with finding the time to get it done. I'll be doing it within the next week.
I don't stock the 240 amp models since they suffer so much in low end output so I worked to help develop 2 new models, a billet 250 and cast 250. If you want the performance without such a hefty price then the cast 250's are for you. Natural finish runs 439.00 and black 469.00
Billet machined 250's 609.00
Billet black 250 639.00
Polished 250 669.00
The Billet 170 amp prices have not changed.
I've been meaning to start a new thread and struggled with finding the time to get it done. I'll be doing it within the next week.
I don't stock the 240 amp models since they suffer so much in low end output so I worked to help develop 2 new models, a billet 250 and cast 250. If you want the performance without such a hefty price then the cast 250's are for you. Natural finish runs 439.00 and black 469.00
Billet machined 250's 609.00
Billet black 250 639.00
Polished 250 669.00
The Billet 170 amp prices have not changed.
The Billet Alternator design for 2015 has not changed, but the pricing has. Still using the 6-phase stator, 12-pole rotor design.
This alternator is compact and powerful! This case design even fits aftermarket heads with elevated valve cover rails using Katech valve covers. Many Corvette Forum members are running this alternator and some have reported that some, if not all of their troublesome electrical gremlins have been eliminated due to overcoming the voltage deficiencies that plague the Corvettes. Low voltage issues in summer stop-and-go traffic? Gone with this upgrade. Stock alternators heat up and are unable to even produce anything close to their rated output. This design incorporates higher efficiency and better cooling to keep the alternator output voltage high, even in higher heat situations.
"So what is there to gain from using the Billet-Tech alternator over the factory original?"
Better system voltage. "So what does better system voltage gain me?"
Many of the electrical components in our cars will perform better with full voltage.
Our ignition coils, fuel injectors, fuel pumps, cooling fans, electric water pumps, headlights (and the list goes on) will all perform better with better system voltage.
Why go with a Billet-Tech alternator over others? Take a good look at the cases of the competitors and you will notice that none of them have the beefy, stronger ears that Billet-Tech provides on their cases. Instead, you'll find some skinny ears with pins pressed in. These are modified cases, designed for another vehicle, modified to fit our cars and not nearly as strong.
4 finish options offered: Machined, black anodized, polished and chrome. I am stocking the more popular black and polished 170 amp units. 240 amp units, machined and chrome units are special order. As long as they’re in stock, I ship ASAP, typically the next business day.
The 170amp units shipped:
Machined 489.00
Black 515.00
Polished 539.00
Chromed 589.00
Add 50.00 for the 240 amp option.
Texas Residents Add 7.75% sales tax
If you’re wanting a custom alternator and 14v battery with 16v charging, PM me for details.
C5 owners, PM me. I’ve got something for many of you as well.
Shipping within the continental US is included. Contact me for shipping outside the lower 48.
If your serpentine system is upgraded from the factory 6-rib to 8-rib, let me know because we'll need to make you a custom pulley for that at an additional cost.
If you have a "flip drive", "Secondary drive", "Direct drive" or any variant of it, you may need a shorter belt. The drives use a K060370
and K060365 or a Dayco 6PK915 or Goodyear 36" length belt are your shorter options.
Paypal to blownblueZ06@gmail.com
For credit card payments, send me a PM with your email address and I will forward you an invoice.
When sending your payment, please verify your shipping address, add a phone number for FedEx and please give me your car info. Year/model etc.
About the warranty:
All Billet-Tech alternators are backed by a 2 year performance guarantee against manufacturers defect, by the manufacturer. Please visit http://www.mechman.com for more details. All sales final.
Black
Machined
Polished
Chrome finish by special order only.
Bret,
I would like to talk to you about getting the correct alternator for my setup, but it will not allow me to PM you. Is there any other way I can get a hold of you?
I would like to talk to you about getting the correct alternator for my setup, but it will not allow me to PM you. Is there any other way I can get a hold of you?
Hey Cole, I apologize for the delayed reply. We're dealing with many emergencies here in the Dallas area. The reason you're unable to PM me is because you have that feature turned off in your profile. You can text me @ 972-seven four one, 7457 and then we can set up a call. It's best to text first because I was basically forced to get the Robokiller app from all the robo calls. If you prefer to call, it'll go through after a small delay.
Thanks,
Bret
__________________
Offering products from A&A Superchargers, East Coast Superchargers, Mechman Alternators, Mantic clutches, RPS clutches, Kooks Headers, Lakewood, LG, Brian Tooley Racing, Comp Cams, FAST, ARP, UPP Turbo systems, Wiseco, Callies, K1, MAST Motorsports, Haltech and many more. PM me for details.
Hey, I have a couple questions regarding which alternator to buy and would also like to know where I could purchase a alternator bypass cable for the C6. Thanks, Jesse
Hi, November 2020, I purchased my Billet Tech 170A and jumper cable, for my C6 (2005) from Bret at :BLOWNBLUEZ@RTKPerformance. You can purchase on line a several places, but you will NOT get the personal and quick assistance, take me by the hand help, that you'll get from Bret, more than satisfied with product and of course Bret. Good luck
Hey, I have a couple questions regarding which alternator to buy and would also like to know where I could purchase a alternator bypass cable for the C6. Thanks, Jesse
What's the skinny on the alternator bypass cable, don't remember hearing anything about that before??
The Billet Alternator design for 2015 has not changed, but the pricing has. Still using the 6-phase stator, 12-pole rotor design.
This alternator is compact and powerful! This case design even fits aftermarket heads with elevated valve cover rails using Katech valve covers. Many Corvette Forum members are running this alternator and some have reported that some, if not all of their troublesome electrical gremlins have been eliminated due to overcoming the voltage deficiencies that plague the Corvettes. Low voltage issues in summer stop-and-go traffic? Gone with this upgrade. Stock alternators heat up and are unable to even produce anything close to their rated output. This design incorporates higher efficiency and better cooling to keep the alternator output voltage high, even in higher heat situations.
"So what is there to gain from using the Billet-Tech alternator over the factory original?"
Better system voltage. "So what does better system voltage gain me?"
Many of the electrical components in our cars will perform better with full voltage.
Our ignition coils, fuel injectors, fuel pumps, cooling fans, electric water pumps, headlights (and the list goes on) will all perform better with better system voltage.
Why go with a Billet-Tech alternator over others? Take a good look at the cases of the competitors and you will notice that none of them have the beefy, stronger ears that Billet-Tech provides on their cases. Instead, you'll find some skinny ears with pins pressed in. These are modified cases, designed for another vehicle, modified to fit our cars and not nearly as strong.
4 finish options offered: Machined, black anodized, polished and chrome. I am stocking the more popular black and polished 170 amp units. 240 amp units, machined and chrome units are special order. As long as they’re in stock, I ship ASAP, typically the next business day.
The 170amp units shipped:
Machined 489.00
Black 515.00
Polished 539.00
Chromed 589.00
Add 50.00 for the 240 amp option.
Texas Residents Add 7.75% sales tax
If you’re wanting a custom alternator and 14v battery with 16v charging, PM me for details.
C5 owners, PM me. I’ve got something for many of you as well.
Shipping within the continental US is included. Contact me for shipping outside the lower 48.
If your serpentine system is upgraded from the factory 6-rib to 8-rib, let me know because we'll need to make you a custom pulley for that at an additional cost.
If you have a "flip drive", "Secondary drive", "Direct drive" or any variant of it, you may need a shorter belt. The drives use a K060370
and K060365 or a Dayco 6PK915 or Goodyear 36" length belt are your shorter options.
Paypal to blownblueZ06@gmail.com
For credit card payments, send me a PM with your email address and I will forward you an invoice.
When sending your payment, please verify your shipping address, add a phone number for FedEx and please give me your car info. Year/model etc.
About the warranty:
All Billet-Tech alternators are backed by a 2 year performance guarantee against manufacturers defect, by the manufacturer. Please visit http://www.mechman.com for more details.
All sales final.
Black
Machined
Polished
Chrome finish by special order only.
Can you give me a price and how quick I can get a machined finished in 170a and 250a I am located in Forney also.
Can you give me a price and how quick I can get a machined finished in 170a and 250a I am located in Forney also.
the black models are the most popular. The 170 is 515.00 and cast 250 is 499.00.
this is not the 240 amp.
the 250 puts out 200 amps at typical idle speeds.
each will take about 10 business days. If yours is broken and you need something immediately, let me know. I can loan you one until the new one arrives if you need.
my cell is 972-741-7457 if you'd like to contact me directly.
the black models are the most popular. The 170 is 515.00 and cast 250 is 499.00.
this is not the 240 amp.
the 250 puts out 200 amps at typical idle speeds.
each will take about 10 business days. If yours is broken and you need something immediately, let me know. I can loan you one until the new one arrives if you need.
my cell is 972-741-7457 if you'd like to contact me directly.
Bret
Ok good deal so what is the non cast machined finish run I am not looking for black
08-26-2020, 10:43 AM
