mjonesjr8

Any aftermarket items that will fit in the side gills, inserts etc...

JKbride

If you are a DIY kinda person you can make these for a few bucks.




The DIY self link is https://www.corvetteforum.com/forums...w-to-pics.html

Hope this helps

hrt vlv

I kinda like the led lighting I have seen, others say it is to rice.

mjonesjr8

Thanks that looks good

BWF07

I have seen the cove lighting and I guess it all comes down to what each person like and doesn't like. It would be a boring world if everyone like all the exact same thinks. With that said, I am not big on the use of the amount of LED's on Corvette's lately. In side the engine compartment so at nightly cruise ins are OK, but It seems like everyone that is doing it is trying to out do the next guy. In my opinion (and again my opinion only) they do have tendency to look a little on the ricer side.

360Rocket

JWMotoring has the side cove lights, remote control turn on, multiple color choices. I have mine in red.

http://shop.jwmotoring.com/C5-and-C6...erCoveKits.htm

I made my own cove grills in gloss black.

1rusty1

I put in the mesh then color matched. I would like to see something a little more pronounced like the GS but it will do.

1rusty1

If you had amber led's and tied them into the running lights and blinkers, it would be a nice addition. I did that with the floorboards on my Motorcycle. They have serve a purpose and look really good.

GuyFromLeMans

Just installed a Billet grille on my Z51, I like her new smile much better!

tennblkc6

looks good.
are your calipers powder coated or painted?

JKbride

They are painted with black high temp engine paint. I painted them first and then used my drimmel tool to brush off the paint from the raised Corvette letters.

cuspid

I put in cove lights using leds, but not as bright as I would like. I used red, blue and yellow. Works perfec,t who sells just a strip that is bright?

ls1121

I would like to see a picture or two if ya don't mind.

MikeERWNC

If I were to do the mesh, I would personally use an black mesh office trash can for Staples or Office Depot.

The mesh is small and the black finish good quality.
I have done it on several motorcycles.
Though I have pondered it on the Corvette, I have just lacked the ambition.

1rusty1

There are the brightest I have ever found. I've used them on my motorcycle floorboards and tied them into the turn signals using the amber.

http://www.customdynamics.com/trufle...d_lighting.htm

cuspid

Thanks, I got this switch works great, I put 15 led lights each side.
http://www.ebay.com/itm/Universal-12V-DC-ON-OFF-Remote-Control-Wireless-12V-Output-Relay-Switch-/171148866759?pt=LH_DefaultDomain_0&hash=item27d94474c7

cuspid

I used a combination of red, yellow and blue LEDS like a flame would have