Lowering with Wheel Spacers
#1
Lowering with Wheel Spacers
I have a 2008 Z51 with 3/8 wheel spacers in the back and 1/4 in the front. I was thinking about lowering it next, but was unsure if the wheels would rub (Width wise). Has anyone tried this yet or have any insight?
Thanks,
Lonney
Thanks,
Lonney
#4
I am lowered all the way in the front on the stock bolts and went after market in the rear.
Lowered almost all the way on the rear (1 full turn left).
I have not had any issues running stock wheels and tire sizes.