New from RPI!Pre-Painted ZR1 Rear Spoiler-$386.95 Painted+Shipped! All C6/Z06 Colors!
#41
Burning Brakes
Member Since: Mar 2008
Location: Obama says I'm a bitter white guy clinging to my guns and religon and he's right
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
Man, that looks sweeeeet. Cannot wait till I get mine ordered along with the stripes.
#43
Melting Slicks
Member Since: Feb 2005
Location: Tn.
Posts: 2,874
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '10-'11
Thanks Mark, I can't wait for you to see the paint match in person...
#44
Platinum Supporting Vendor
Thread Starter
Sorry for the delay in posting pics of my ZR1 reproduction spoiler installed. I had a crazy weekend and wasn't able to get time to install it until Sunday afternoon. I must say the install went really well ("even the drilling of the holes").
I had no issues with the install. I am really happy with Josh @ RPI Design from a customer service standpoint, quality of workmanship (DSOM paint match is DEAD ON!!!!!).
Tim
I had no issues with the install. I am really happy with Josh @ RPI Design from a customer service standpoint, quality of workmanship (DSOM paint match is DEAD ON!!!!!).
Tim
__________________
RPI DESIGNS, LLC. - C5/C6/C7 Corvette Parts
4000+ C5/C6/C7 Parts & accessories - Forum members get 10% off with SS2007 coupon at checkout
Like us on www.facebook.com/rpidesigns and you might win $100.
Our brand new C7 Corvette Z06 Style Side Skirts come painted in Carbon Flash Metallic, see them here!
email: rpi.designs.customerservice@gmail.com Web: www.rpidesigns.com
RPI DESIGNS, LLC. - C5/C6/C7 Corvette Parts
4000+ C5/C6/C7 Parts & accessories - Forum members get 10% off with SS2007 coupon at checkout
Like us on www.facebook.com/rpidesigns and you might win $100.
Our brand new C7 Corvette Z06 Style Side Skirts come painted in Carbon Flash Metallic, see them here!
email: rpi.designs.customerservice@gmail.com Web: www.rpidesigns.com
#45
Melting Slicks
Member Since: Feb 2005
Location: Tn.
Posts: 2,874
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '10-'11
Feel free to use any of these pics to help you sell these spoilers. I am here to answer any questions from your customers about this product...
Tim
#46
Burning Brakes
Spoiler looks GREAT Tim! Congrats on a job well done on the install and write-up as well. DSOM is a great color.
Pete
Pete
#47
Platinum Supporting Vendor
Thread Starter
#48
Burning Brakes
Member Since: Jul 2005
Location: Warwick RI
Posts: 1,064
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the delay in posting pics of my ZR1 reproduction spoiler installed. I had a crazy weekend and wasn't able to get time to install it until Sunday afternoon. I must say the install went really well ("even the drilling of the holes").
I had no issues with the install. I am really happy with Josh @ RPI Design from a customer service standpoint, quality of workmanship (DSOM paint match is DEAD ON!!!!!).
The car is a little dirty.. Anyway,,,Here are a few pics of my install along the way.
Spoiler out of the box.
Removal of tail lights to get to the stock third brake light,...
Dry fit of spoiler(removed studs so it would fit flush)
Marking up the rear bumper for drill holes()
Setting up my pushpin method for locating my drill holes..I just went to officemax to locate these large blue pins (item#350-956).
Pins installed with some double sided tape to fill the gap and keep the pins straight.
Sorry I forgot to take pics of my drill marks before I started getting drill happy. Honestly, I wasn't real nervous about drilling the holes as long as I know I was 200% sure where the holes were to be... That old saying - Messure twice and cut once.. Well, I messured many times and drilled 6 holes x 3 rounds (1/8,3/16 and last at 5/16).
Spoiler through the holes. Notice the tape on top of the spoiler to mark my pin locations so that I could push down right over them
Here a a few pics of the final install of the spoiler. This was after I removed the tape, bolted the spoiler down nice and tight and reinstalled the tail lights. What do you think?
Again, I can't thank Josh enough for a GREAT product!!!!Also, I would like to thank GOTCHA too for posting up his procedures when he installed his spoiler. They worked like a charm!!!
Let me know if anyone has any question..
Tim
I had no issues with the install. I am really happy with Josh @ RPI Design from a customer service standpoint, quality of workmanship (DSOM paint match is DEAD ON!!!!!).
The car is a little dirty.. Anyway,,,Here are a few pics of my install along the way.
Spoiler out of the box.
Removal of tail lights to get to the stock third brake light,...
Dry fit of spoiler(removed studs so it would fit flush)
Marking up the rear bumper for drill holes()
Setting up my pushpin method for locating my drill holes..I just went to officemax to locate these large blue pins (item#350-956).
Pins installed with some double sided tape to fill the gap and keep the pins straight.
Sorry I forgot to take pics of my drill marks before I started getting drill happy. Honestly, I wasn't real nervous about drilling the holes as long as I know I was 200% sure where the holes were to be... That old saying - Messure twice and cut once.. Well, I messured many times and drilled 6 holes x 3 rounds (1/8,3/16 and last at 5/16).
Spoiler through the holes. Notice the tape on top of the spoiler to mark my pin locations so that I could push down right over them
Here a a few pics of the final install of the spoiler. This was after I removed the tape, bolted the spoiler down nice and tight and reinstalled the tail lights. What do you think?
Again, I can't thank Josh enough for a GREAT product!!!!Also, I would like to thank GOTCHA too for posting up his procedures when he installed his spoiler. They worked like a charm!!!
Let me know if anyone has any question..
Tim
#49
Team Owner
Great job on the write up and the pics Tim.
That spoiler really adds a nice touch to the car.
That spoiler really adds a nice touch to the car.
#51
Platinum Supporting Vendor
Thread Starter
#52
Support St Jude!!
Member Since: Nov 2005
Location: Memphis Tn
Posts: 1,917
Received 93 Likes
on
57 Posts
2016 C7 of the Year Finalist
2015 C6 of the Year Finalist
Cruise-In X Veteran
St. Jude Co-Organizer
St. Jude Donor '09-'10
1st St. Jude Donor '11-'12-'13-'14-'15-'16-'17-'18-'19
Looks great Tim!!!
#53
Platinum Supporting Vendor
Thread Starter
#54
Racer
Member Since: Oct 2004
Location: Williamsburg Virginia
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
While we are talking RPI Spoilers...
Can I get a forum member discount on one of these spoilers in Arctic White shipped to Stafford, VA 22556? Please PM me!
[/QUOTE]
[/QUOTE]
#56
Platinum Supporting Vendor
Thread Starter
#57
Platinum Supporting Vendor
Thread Starter
Has anyone else installed one of these yet? Please post a picture, we'll look forward to seeing them!!
#59
Melting Slicks
Member Since: Feb 2005
Location: Tn.
Posts: 2,874
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '10-'11
Thanks Matt!
Thanks Josh...
I sure would like to see more pics of these installed too. I would like to hear what others have to say about it after the install