Sway Bar End Links
#1
Racer
Thread Starter
Sway Bar End Links
Hey Guys,
My squeaky/creaking sway bar end links are acting up again. I got rid of the creakk by just greasing them in the past, but the noise is back again and I'm thinking of just replacing them. Where is the best place to buy new end links??
Thanks for the help as always.
My squeaky/creaking sway bar end links are acting up again. I got rid of the creakk by just greasing them in the past, but the noise is back again and I'm thinking of just replacing them. Where is the best place to buy new end links??
Thanks for the help as always.
Last edited by dr.stephan; 03-19-2010 at 11:45 PM.
#2
Burning Brakes
This is what I did and can't say enough good about doing it. I had replaced the stock ones 3 times and it still popped. But after putting these on it is quiet at last. Look at post #3 and she will fix you up. hope this helps
#5
Instructor
Member Since: Jun 2007
Location: Ladson SC
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '10
I replaced mine with the LGs as well when I upgraded to Z51 bars. Mine were sqeaking also prior. Totatlly quiet now.
Last edited by mus99gt; 03-19-2010 at 11:29 PM. Reason: Spelling
#7
Racer
Thread Starter
#8
Burning Brakes
#10
I just installed my new end links, purchased from MTI, and I still have the "end link klunk". I adjusted them to the exact same length as the original stock ones, so I'm beginning to suspect I may have a different issue??
#12
Melting Slicks
Member Since: Nov 2005
Location: Houston 06 C6 Ysi SC 402 fgd TX
Posts: 2,345
Likes: 0
Received 2 Likes
on
2 Posts
get my used LGs, i went with PFADT Competition sways which include their end links
they are as good as new
http://forums.corvetteforum.com/c6-p...post1573101098
they are as good as new
http://forums.corvetteforum.com/c6-p...post1573101098
#13
Premium Supporting Vendor
The revised 2010 end links have been developed to dismiss the noise and rattling issue. If anyone is interested in the GM end links let me know.
__________________
Phone: 484-334-8833
Owner of CULTRAG Performance
Shop Our Factory GM Parts Website
Phone: 484-334-8833
Owner of CULTRAG Performance
Shop Our Factory GM Parts Website
#15
Burning Brakes
My '08 F55 has a light metallic popping sound, mostly at low speed in parking lots. It seems to happen when weight shifts from one side of the car to the other.
Do you guys think the LG Motorsports end links would get rid of the noise? (I've already tried changing the differential fluid to Dexron LS and that didn't help).
Also, LG Motorsports has a funny typo in their website's product description:
"LG Motorsports took the GM end links one setup farther ..."
Do you guys think the LG Motorsports end links would get rid of the noise? (I've already tried changing the differential fluid to Dexron LS and that didn't help).
Also, LG Motorsports has a funny typo in their website's product description:
"LG Motorsports took the GM end links one setup farther ..."
#16
Team Owner
Member Since: Jun 2005
Location: Northern, VA
Posts: 46,100
Received 2,478 Likes
on
1,941 Posts
St. Jude Donor '15
"In honor of jpee"
My '08 F55 has a light metallic popping sound, mostly at low speed in parking lots. It seems to happen when weight shifts from one side of the car to the other.
Do you guys think the LG Motorsports end links would get rid of the noise? (I've already tried changing the differential fluid to Dexron LS and that didn't help).
Also, LG Motorsports has a funny typo in their website's product description:
"LG Motorsports took the GM end links one setup farther ..."
Do you guys think the LG Motorsports end links would get rid of the noise? (I've already tried changing the differential fluid to Dexron LS and that didn't help).
Also, LG Motorsports has a funny typo in their website's product description:
"LG Motorsports took the GM end links one setup farther ..."
#17
#18
Race Director
I have the recent upgraded GM end links and the car has never been so quite. I am still holding my breath though, only have a few hundred miles on them.
#19
Team Owner
Went through the stock set around 10K miles, the second GM set about 15K miles.
Give it time, the popping will be back with the factory links.
Give it time, the popping will be back with the factory links.