0Quik Z06

Ok guy's finally the part's have arrived. As far as I know everything im listing is in stock. I will have pix of the carbon hood tomorrow. Remember this is an OEM style front bumper you do not need flared fenders to use this bumper, same goes for the front fenders, they work with the stock bumper. Prices for everything are listed below. Lot's of pix

Front Bumper





Rear Fenders




ZR Hood




Front Fenders




Wing



Sideskirts



**EDIT** Here is the Retail pricing for the part's, I will be doing 20% off retail on almost everything, but since the fenders are quite expnsive in carbon, I will do 30% off on those (which on the front fenders is $419 off retail)

2005-2009 Chevrolet Corvette ZR Edition Front Bumper $499
2005-2009 Chevrolet Corvette ZR Edition Front Lip $299
2005-2009 Chevrolet Corvette Carbon Creations ZR Edition Front Lip $449
2005-2009 Chevrolet Corvette ZR Edition Side Skirts $449
2005-2009 Chevrolet Corvette Carbon Creations ZR Edition Side Skirts $749
2005-2009 Chevrolet Corvette ZR Edition Wing $349
2005-2009 Chevrolet Corvette Carbon Creations ZR Edition Wing $499
2005-2009 Chevrolet Corvette ZR Edition Front Fenders $799
2005-2009 Chevrolet Corvette Carbon Creations ZR Edition Front Fenders $1399
2005-2009 Chevrolet Corvette ZR Edition Rear Fenders $699
2005-2009 Chevrolet Corvette Carbon Creations ZR Edition Rear Fenders $1299
2005-2009 Chevrolet Corvette ZR Edition Hood $799
2005-2009 Chevrolet Corvette Carbon Creations ZR Edition Hood $1099
2005-2009 Chevrolet Corvette Carbon OEM Style Hood $870

Nice95gle

Can't wait to see the finished product.

corvettezman

Love the front fenders, and the price is
Any fix or idea on what to use for a wheel well liner in the front ?

mcandrew67

I would be in for front fenders and bumper looks good so far. How would stock size Z wheels look on the front if it is wider >?
David

0Quik Z06

Thanks

Well my idea for the liner fix so to speak was, im thinking if we could somehow make the underside of the fender extend to meet the OEM liner. It's only an inch wider up front and a bit over inch and a half on the rear, so I think we could somehow make it work. IMO that is the best bet, that way there is no additional cost to you guys as far as having to buy new liners. Im still working on that.

I dont know personally. I know most people when we began the project wanted wider front fenders, so thats what we made Most said they could just run a small spacer, instead of having to buy all new wheels. Unless someone with more wheel knowledge can step in and let us know how it would look.

corvettezman

I think that would be a great idea if it can be achieved
The labor to swap the liners is very intensive because unlike the rears, they are glued on.
Now would it be mandatory to buy a Z06 nose or your version of it, or would the stock C6 nose lineup ? I already have a ram air hood, and maybe retaining the stock nose appearance is better. Don't want too many ram air holes. Not sure if I missed this info in your previous threads or posts. Sorry.

corviette

are u saying that the front fenders are one inch wider than the stock Z06 front fenders or is it one inch wider than the non Z06 fenderS?

dvilin

St.Char

Progress looks great! Keep up the good work

0Quik Z06

No I should have mentioned it. These fenders will line up with the stock C6 bumper. All we did with the front bumper is add the Z06 scoop and also a bit or material at the bottom so we could make the lower lip we made look good. The lower lip will also be available in carbon, but it will most likely only fit our new bumper. Also before I forget the vents in the fenders will be opened up, but we let the manufacturer do that, so I wont have pix of that for a while.

The front fenders are 1 inch wider than the base C6, and the rear fenders are the same width as a Z06. Sorry for the confusion.

*edit* Im actually on the phone with my manufacturer as I type this. He is saying the stock liners WILL work with the front and rear fenders. Basically we will add enough material on the inside part of the fender (the lip on the wheelwell) and it will extend in far enough so you could clip on your OEM liner.

mcandrew67

Cool, so basically the stock Z rims will fit., I thought you meant you were making the fenders 1 inch wider than the Z fenders. So basically we can order these and not worry about a bumper then get a scooped hood. Thats what I think I want to do. I'm def in for a set once you get final pics.
David

0Quik Z06

Yeah sorry I meant 1 inch wider than the base C6. I wont be able to get pix of this stuff for a couple months at least However as mentioned I will have pix to all the C5 stuff I made, which will show what these parts will look like when finished. What I did for the C5 guys and I can do here is take pre-orders which is 50% down and the balance and shipping on arrival. It helps quite a bit you wouldnt have to send all the money at once and gives people time to save up

Spectrel

All I have to say is: it's about time someone did something like this, and I am really excited!. I think there is a big crowd that want to go widebody but not look like a Z06 clone ( not that there is anything wrong with this, its just not for everyone ). Keep up the good work, subscribed!

mcandrew67

Cool, I am definitely in then. Will you have screens or anything for inside the fender vents? And I am assuming you can re use the original hardware?

2xmks

Nice!!

0Quik Z06

Yes everything that I make that is vented will have a mesh screen. You can use all your factory hardware on the new stuff. I actually just got all the pricing, I will post it up later (Lol posting from my phone)

ILLUSHN

0Quik Z06

Ok I edited my original post up top, all the retail prices are listed. As you can see I am doing 20% off on everything, and the fenders in carbon will be 30% off

spin-doktor

Cant wait to see a finished product.

corvettezman

Interested in the front fenders for sure. Please keep me on a list for when they become available.