Stainless steel front fender duct vent screens
#1
Intermediate
Thread Starter
Member Since: Jun 2005
Location: SF Bay Area CA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Stainless steel front fender duct vent screens
Here are pictures of aftermarket stainless steel front fender duct vent screens on a Lemans Blue LMB 2005 Coupe.
This aftermarket version is not the best quality, but looks fine when not scrutinized closely and the cost is around $50 versus $250 for a set of the official GM parts.
The installation is pretty straightforward. It took less then 1 hour each side. The parts and installation techniques clearly evidence the after-thought that these parts really are. You have a hand-cut piece of screen (that you could buy at a hardware store) and some plastic blocks which you glue onto the inside of the fender. One side did come loose and had to be re-cemented.
Glad to answer questions about other mods shown below in my signature.
This aftermarket version is not the best quality, but looks fine when not scrutinized closely and the cost is around $50 versus $250 for a set of the official GM parts.
The installation is pretty straightforward. It took less then 1 hour each side. The parts and installation techniques clearly evidence the after-thought that these parts really are. You have a hand-cut piece of screen (that you could buy at a hardware store) and some plastic blocks which you glue onto the inside of the fender. One side did come loose and had to be re-cemented.
Glad to answer questions about other mods shown below in my signature.
#6
Le Mans Master
Originally Posted by burtonbl103
Looks great
Wonder what black powdercoated would lookl like ?
Wonder what black powdercoated would lookl like ?
#7
Melting Slicks
Member Since: Nov 2004
Location: Denver PA
Posts: 2,285
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '07
I put on the perforated ones. See pics.
http://community.webshots.com/photo/...3328134kfnYMu#
http://community.webshots.com/photo/...43328134mTtHGM
http://community.webshots.com/photo/...3328134rAarZT#
http://community.webshots.com/photo/...3328134kfnYMu#
http://community.webshots.com/photo/...43328134mTtHGM
http://community.webshots.com/photo/...3328134rAarZT#
#8
Intermediate
Thread Starter
Member Since: Jun 2005
Location: SF Bay Area CA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
OEM colors
Originally Posted by dark_phantom
I would like to see black powercoated on black.
Not powercoat but here they are in OEM colors.
http://www.madvet.com/shop?frame=7.42.7389
#10
Le Mans Master
Originally Posted by bobinca
#11
Moderator
Originally Posted by burtonbl103
Looks great
Wonder what black powdercoated would lookl like ?
Wonder what black powdercoated would lookl like ?
#12
Melting Slicks
Originally Posted by bobinca
#14
#20
Melting Slicks
Originally Posted by sscamaro
I put on the perforated ones. See pics.
http://community.webshots.com/photo/...3328134kfnYMu#
http://community.webshots.com/photo/...43328134mTtHGM
http://community.webshots.com/photo/...3328134rAarZT#
http://community.webshots.com/photo/...3328134kfnYMu#
http://community.webshots.com/photo/...43328134mTtHGM
http://community.webshots.com/photo/...3328134rAarZT#