[Z06] c5z w/ 10.5 front/rears 275/35F and 295/35R
#22
Racer
Member Since: Sep 2011
Location: Orlando Florida
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Op, Looks damn good. Kt yours looks really good too. Im really starting to consider this lowering on stock bolts. Any negatives to it? I figured the z was setup pretty well from the factory, thought lowering it without doing anything else may throw the geometry off.
#24
Thanks- the LG G2's are very nice. I chose them over the GT2's because they are customizable and overall a better choice for the track. I went with 700 lb springs up front and 650 lb springs on the rear. Before the coilovers i had aftermarket bolts. Comparing the 2, the coilovers are far stiffer based on my spring selection, but the ride quality is 100% better than with the lowering bolts. The harsh ride is gone! Never realized how harsh the ride was until i got the coilovers. My back thanks me..lol
#25
Racer
Thread Starter
Member Since: Sep 2007
Location: CT
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
Thanks- the LG G2's are very nice. I chose them over the GT2's because they are customizable and overall a better choice for the track. I went with 700 lb springs up front and 650 lb springs on the rear. Before the coilovers i had aftermarket bolts. Comparing the 2, the coilovers are far stiffer based on my spring selection, but the ride quality is 100% better than with the lowering bolts. The harsh ride is gone! Never realized how harsh the ride was until i got the coilovers. My back thanks me..lol
i'm street only. thoughts?