Who makes some ceramic coated headers for vettes?
#1
Drifting
Thread Starter
Who makes some ceramic coated headers for vettes?
I was planning on going w/kooks, but noticed they weren't ceramic coated. I will probably still go w/them, but I was wondering if anyone noteworthy makes ceramic coated headers. Thanks--Andy
#2
Drifting
Member Since: May 2002
Location: San Francisco CA
Posts: 1,607
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who makes some ceramic coated headers for vettes? (oufan2929)
You could just buy a set of Kooks and have them sent to Jet-Hot to be coated.
Check with them for more info and to see what it will cost: http://www.jet-hot.com/
Check with them for more info and to see what it will cost: http://www.jet-hot.com/
#4
Team Owner
Re: Who makes some ceramic coated headers for vettes? (oufan2929)
I have the coated TPIS headers... they have been on the car for years and I have had no problems with them.
VR
VR
#5
Drifting
Member Since: Nov 2001
Location: Jacksonville Florida
Posts: 1,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who makes some ceramic coated headers for vettes? (oufan2929)
I have the coated FLP's - very happy with them. I did have Random Tech make up a 3" inlet 2.5" outlet high flow cat, better than the 2.5" in and out that comes with the system IMO.
Les
Les
#6
Safety Car
Member Since: Nov 2003
Location: San Diego, CA "leaf" "tee" "e"
Posts: 4,979
Likes: 0
Received 5 Likes
on
4 Posts
Re: Who makes some ceramic coated headers for vettes? (SFVetteman)
You could just buy a set of Kooks and have them sent to Jet-Hot to be coated.
Check with them for more info and to see what it will cost: http://www.jet-hot.com/
Check with them for more info and to see what it will cost: http://www.jet-hot.com/
Get them coated to help prevent o2 sensors codes.
#8
Safety Car
Member Since: Jul 2002
Location: Fishing Somewhere Cold
Posts: 3,874
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '11-'12-'13, '15
Re: Who makes some ceramic coated headers for vettes? (nuke61)
Probably due to the heat being retained in the pipe keeping the temps high for the sensors...I have LGM's uncoated and have had no code issues...
#9
Premium Supporting Vendor
Re: Who makes some ceramic coated headers for vettes? (sweetcharity)
We offer kooks headers fully coated! Feel free to give me a call if you decide you want kooks I can also get Dynatechs coated
Jason
Texas Speed http://www.texas-speed.com
Jason
Texas Speed http://www.texas-speed.com
#10
Drifting
Thread Starter
Re: Who makes some ceramic coated headers for vettes? (Jason 98 TA)
Jason, so all the kooks come coated? I thought they were just stainless steel. Or are you guys coating them yourselves?
#11
Le Mans Master
Re: Who makes some ceramic coated headers for vettes? (oufan2929)
My coated TPIS's looked like junk after a year.
So I had some stainless Kooks installed. They don't come coated though, but uncoated stainless is better than coated mild steel IMO.
So I had some stainless Kooks installed. They don't come coated though, but uncoated stainless is better than coated mild steel IMO.
#12
Melting Slicks
Re: Who makes some ceramic coated headers for vettes? (oufan2929)
The Kooks stainless headers don't come coated, but Jason can get them coated for you. That's what he did for me. I couldn't be happier with them.
#13
CHICAGO CREW !
Member Since: Nov 2001
Location: We are living in a Bazzaro World everything is upside down half ass backwards !
Posts: 17,588
Received 90 Likes
on
63 Posts
CI 4-5-6-7-8-9 Veteran
St. Jude Donor '06-'07-'08 & '12
Re: Who makes some ceramic coated headers for vettes? (oufan2929)
GRIZZLYS i have these on my car very happy with them here's the link not cheap
http://www.section8racing.com/grizzl...ust_system.htm
http://www.section8racing.com/grizzl...ust_system.htm
#14
Pro
Member Since: Nov 2003
Location: herminston oregon
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who makes some ceramic coated headers for vettes? (oufan2929)
i never heard of grizzly headers. i look at the web site, for a coated lg tube header 2 2/3" pipe that will bolt up to stock cat backs. there only 1850.00 not a bad deal. has anybody installed a set of these on there car? any dyno sheets.
#15
Drifting
Re: Who makes some ceramic coated headers for vettes? (myblackC5)
Jet Hot will be offering coated C5 headers very soon. I have a set of their prototypes, but have not installed them yet.
#16
Le Mans Master
Member Since: Dec 2001
Location: Irvine CA
Posts: 5,761
Likes: 0
Received 0 Likes
on
0 Posts
Now that stainless steel is the norm on header systems, many had opted not to ceramic coat them since SS is thicker and more corrosion resistant than mild steel, which was the one used before (TPIS, RKSport, FLPs, etc.)
As of yet, I have not seen proof that ceramic-coating will improve HP or will it improve exhaust gas scavenging (in theory, it will) but it will definitely make your headers look better after a long time.
If you must have it, have it coated yourself. I went with Matt G's GP with Stainlessworks and had it shipped to Swaintech for their ceramic treatment on the longtubes. I know that Xtreme is close to JetHot so you might find a deal with them, ask Bill/Mike.
As of yet, I have not seen proof that ceramic-coating will improve HP or will it improve exhaust gas scavenging (in theory, it will) but it will definitely make your headers look better after a long time.
If you must have it, have it coated yourself. I went with Matt G's GP with Stainlessworks and had it shipped to Swaintech for their ceramic treatment on the longtubes. I know that Xtreme is close to JetHot so you might find a deal with them, ask Bill/Mike.
Last edited by c5chris; 09-13-2004 at 03:58 PM.
#17
Intermediate
Member Since: Jan 2004
Location: Bridgeport pa
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Jet Hot headers
Originally Posted by HITMAN99
Jet Hot will be offering coated C5 headers very soon. I have a set of their prototypes, but have not installed them yet.
Yes, Jet Hot is now offering our own headers for the C5. (I can provide pictures of the new headers) We offer the headers, fully coated in&out with the sterling silver finish. We are offer the headers for $674+s&h to the door. Please feel free to call or email me with any questions.
Thanks
Chris
1-800-432-3379 ext 110
chris@jet-hot.com
PS: We can coat a set of V8 long tube headers, in&out with the sterling silver finish ,for $279+s&h back. All corvette forum members get a 20% discount off coat thier parts. This means your price would be $223.20+s&h back.