DTE Again Has The 3.90 & 4.10 Corvette Gear Sets....
#1
Collections Hold
Thread Starter
Member Since: Aug 2002
Location: Fort Wayne Indiana
Posts: 2,899
Likes: 0
Received 5 Likes
on
5 Posts
DTE Again Has The 3.90 & 4.10 Corvette Gear Sets....
FYI-
Tomorrow we are taking delivery of a pallet of 3.90 ratio gear sets and our order for the 4.10 ratio will arrive in three weeks, so we'll once again be able to resume production of our high performance Corvette differentials that many of you are currently running. :hurray:
We are going to fill our differential customer waiting list first and then we can process new orders thereafter, so if you've contemplated upgrading your Corvette with one of our HP differentials, now may be the time to place your order so that it can be filled in an expedited fashion. :)
Here is a link to our webpage with the menu of differential products and services we offer. http://www.dynotech-eng.com/dte_c5_diff.htm
Happy motoring gents and have a great day! :flag :auto:
Best Regards,
Phil- DTE
Tomorrow we are taking delivery of a pallet of 3.90 ratio gear sets and our order for the 4.10 ratio will arrive in three weeks, so we'll once again be able to resume production of our high performance Corvette differentials that many of you are currently running. :hurray:
We are going to fill our differential customer waiting list first and then we can process new orders thereafter, so if you've contemplated upgrading your Corvette with one of our HP differentials, now may be the time to place your order so that it can be filled in an expedited fashion. :)
Here is a link to our webpage with the menu of differential products and services we offer. http://www.dynotech-eng.com/dte_c5_diff.htm
Happy motoring gents and have a great day! :flag :auto:
Best Regards,
Phil- DTE
#2
Racer
Member Since: Jul 2002
Location: Minnetonka MN
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Re: DTE Again Has The 3.90 & 4.10 Corvette Gear Sets.... (DynoTech Engineering)
When will the 3.90 Stage 3 be available. I am holding out the work to be done on my car until it is ready as it needs a new tranny at this point. Also where are you guys at with the differential strut brace for the A4's. Been trying to hold out for this stuff, but with warm weather now here, I am getting a bit anxious to get the car back on the road and would like to have it all done at the same time.
#3
Collections Hold
Thread Starter
Member Since: Aug 2002
Location: Fort Wayne Indiana
Posts: 2,899
Likes: 0
Received 5 Likes
on
5 Posts
Re: DTE Again Has The 3.90 & 4.10 Corvette Gear Sets.... (brialex42)
The Stage 3 differential is RIGHT around the corner and we'll finally be releasing it VERY soon. We'll keep the forum posted :party:
The A4 diff. strut has been a real challenge to integrate into the C5 chassis with the transmission being bigger/wider and all, while still fitting into the same space as the M6.... We've got a couple of iterations here from prototyping and I'm just not pleased with the final outcome just yet. The M6 differential strut unit was MUCH easier to engineer than the A4 and the auto version just needs to be redesigned slightly from prototype and we can release it. Until then, we're not comfortable with its release until its absolutely engineered correctly the first time.
Best Regards,
Phil- DTE
The A4 diff. strut has been a real challenge to integrate into the C5 chassis with the transmission being bigger/wider and all, while still fitting into the same space as the M6.... We've got a couple of iterations here from prototyping and I'm just not pleased with the final outcome just yet. The M6 differential strut unit was MUCH easier to engineer than the A4 and the auto version just needs to be redesigned slightly from prototype and we can release it. Until then, we're not comfortable with its release until its absolutely engineered correctly the first time.
Best Regards,
Phil- DTE
#6
Instructor
Member Since: Oct 2003
Location: Jackson Ms
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: DTE Again Has The 3.90 & 4.10 Corvette Gear Sets.... (wrustywrench)
D, are you finished with the M6 strut brace ? Is it ready to hold 6200rpm launches ? If so im ready to order RAT NOW !!!!!!!!!!!!!!!!!!!!!!!
#7
Collections Hold
Thread Starter
Member Since: Aug 2002
Location: Fort Wayne Indiana
Posts: 2,899
Likes: 0
Received 5 Likes
on
5 Posts
Re: DTE Again Has The 3.90 & 4.10 Corvette Gear Sets.... (NONitro)
We have been finished with that version for nearly two minths now and have sold quite a few sets... We launch at 7000 RPM (right on the rev limiter)here...... :chevy
Best Regards,
Phil- DTE
Best Regards,
Phil- DTE
#8
Instructor
Member Since: Oct 2003
Location: Jackson Ms
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: DTE Again Has The 3.90 & 4.10 Corvette Gear Sets.... (DynoTech Engineering)
WHOOOOOOOOOOOOOHOOOOOOOOOOOOOOOOOO!!!!!! !!!!!!!!!!!!!!!!I'll call you in a few minutes !!!
#10
Melting Slicks
Member Since: Aug 2003
Location: Fly Over State
Posts: 2,406
Likes: 0
Received 0 Likes
on
0 Posts
Senior Member
Cruise-In V Veteran
Re: DTE Again Has The 3.90 & 4.10 Corvette Gear Sets.... (DynoTech Engineering)
Phil took GREAT care of me with my purchase of their 4:10s and Diff. Strut. :thumbs: :thumbs: :cheers:
#13
Team Owner
Re: DTE Again Has The 3.90 & 4.10 Corvette Gear Sets.... (ilcorvettegiallo)
.. So to have 4.10's, hardened output shaft, and labor to put it all in is $1949!? ..
Mark
#15
Collections Hold
Thread Starter
Member Since: Aug 2002
Location: Fort Wayne Indiana
Posts: 2,899
Likes: 0
Received 5 Likes
on
5 Posts
Re: DTE Again Has The 3.90 & 4.10 Corvette Gear Sets.... (66ImpalaLT1)
ilcorvettegaillo-
Yes, that price is correct. You'll not find another HP Corvette differential that has the level of attention to detail we give it, has specialized internal proprietary components engineered specifically for racing and still remains quiet in operation, yet brutally strong. We ship these differentials all over the country and some internationally for our customers and when they receive it, they can see directly how well their money was spent.
We don't ever claim to be the cheapest around, but we build a very durable differential that will take the abuse you give it. We also refuse to cut corners and skimp on the little details in blueprinting one of these just to "bring the price down", because if it fails prematurely due to cheap internal parts or shoddy workmanship, then we will most likely get an unpleasant phone call from you and niether one of us wants that.... :)
Best Regards,
Phil, DTE
Yes, that price is correct. You'll not find another HP Corvette differential that has the level of attention to detail we give it, has specialized internal proprietary components engineered specifically for racing and still remains quiet in operation, yet brutally strong. We ship these differentials all over the country and some internationally for our customers and when they receive it, they can see directly how well their money was spent.
We don't ever claim to be the cheapest around, but we build a very durable differential that will take the abuse you give it. We also refuse to cut corners and skimp on the little details in blueprinting one of these just to "bring the price down", because if it fails prematurely due to cheap internal parts or shoddy workmanship, then we will most likely get an unpleasant phone call from you and niether one of us wants that.... :)
Best Regards,
Phil, DTE
#16
Drifting
Member Since: Jul 2000
Location: the West is the best
Posts: 1,289
Likes: 0
Received 1 Like
on
1 Post
Re: DTE Again Has The 3.90 & 4.10 Corvette Gear Sets.... (DynoTech Engineering)
quote [ We have been finished with that version for nearly two minths now and have sold quite a few sets... We launch at 7000 RPM (right on the rev limiter)here...... ] end of quote
Phil: Have you released the instructions for the installation of these struts yet?
Phil: Have you released the instructions for the installation of these struts yet?
#17
Collections Hold
Thread Starter
Member Since: Aug 2002
Location: Fort Wayne Indiana
Posts: 2,899
Likes: 0
Received 5 Likes
on
5 Posts
Re: DTE Again Has The 3.90 & 4.10 Corvette Gear Sets.... (2ndVette)
Our webmaster is scheduled to have the installation instructions posted on our website by Thursday morning, so for all of you that have purchased our product and haven't installed it yet, you can look there for the final, detailed, photo enhanced instructions there. Just go to the webpage on our website that has the differential strut description. :) All of the future kits will have the instructions already included in the box.
Regards,
DTE
Regards,
DTE
#18
Burning Brakes
Re: DTE Again Has The 3.90 & 4.10 Corvette Gear Sets.... (DynoTech Engineering)
Phil, glad to see you are getting the 4.10s. The A4 is so much more responsive then before that the MN6 seems slow. Looking forward to seeing you next month.