GP on new FAST intake manifold from LG Motorsports
#41
Instructor
Member Since: Aug 2001
Location: West Islip NY
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Re: GP on new FAST intake manifold from LG Motorsports (LG Motorsports)
Hi Guys,
If you could just email me just to tell me to put you on the list, I can manage it better. I have a folder where I am saving these so when we get the manifolds, we can get the orders ready and out to you as fast as we can.
just a short email to: ... Lou@LGMotorsports.com .... With the reference to the>>> FAST Manifold<<< in the subject line, will do the trick.
Phil.
YOU CAN'T RESIST~~~~ YOU CAN'T RESIST~~~~ YOU CAN'T RESIST~~~~~~~~~~~~~~~~ :lol:
Mod fever has taken hold of you.
LG
[Modified by LG Motorsports, 7:37 PM 8/29/2003]
[Modified by LG Motorsports, 7:38 PM 8/29/2003]
If you could just email me just to tell me to put you on the list, I can manage it better. I have a folder where I am saving these so when we get the manifolds, we can get the orders ready and out to you as fast as we can.
just a short email to: ... Lou@LGMotorsports.com .... With the reference to the>>> FAST Manifold<<< in the subject line, will do the trick.
Phil.
YOU CAN'T RESIST~~~~ YOU CAN'T RESIST~~~~ YOU CAN'T RESIST~~~~~~~~~~~~~~~~ :lol:
Mod fever has taken hold of you.
LG
[Modified by LG Motorsports, 7:37 PM 8/29/2003]
[Modified by LG Motorsports, 7:38 PM 8/29/2003]
Thanks
Joe
#43
Re: GP on new FAST intake manifold from LG Motorsports (LG Motorsports)
Lou, I guess I'm not up to date but what is the lsx engine? What does the fast manifold look like, and are there any proven numbers yet? I have a 03 zo6 and would be intrested. I just would like a little more info on the manifold.
Thanks, Jason :confused:
Thanks, Jason :confused:
#44
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2001
Location: Dallas Tx
Posts: 8,392
Received 571 Likes
on
292 Posts
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
Re: GP on new FAST intake manifold from LG Motorsports (jayszo6)
Yes, I will post a list tomorrow, or just email all who have asked to be placed on the list.
The LSx engine is just short for LS1 and LS6. I was saving time and not writing the 1 and the 6. Now subtract what I saved by saying LSx, from what I just wrote, and I am in the hole now. ;)
I will call and try to get at least a ball park on the pricing.
We were told the hp increase should be 10+ over the LS6 manifold even on a nearly stock engine. If this is the case, then it is a great bargin. And it will free up some hp on the current cam and head packages.
Thanks guys
LG
#45
Burning Brakes
Member Since: Jun 1999
Location: Auburn WA
Posts: 862
Likes: 0
Received 0 Likes
on
0 Posts
Re: GP on new FAST intake manifold from LG Motorsports (jayszo6)
What does the fast manifold look like...
#48
Re: GP on new FAST intake manifold from LG Motorsports (ShadowZ28)
Im in if price is right. Then my ls6 can go on the vette and the camaro will get the Fast intake to go with the g5x2.
#52
Team Owner
Member Since: Apr 2001
Location: Elmhurst, IL (West Suburb of Chicago) & Home of MEGA Horsepower
Posts: 26,714
Received 584 Likes
on
399 Posts
St. Jude Donor '06
Re: GP on new FAST intake manifold from LG Motorsports (vstella)
Well ...you have my attention!! I'm definately interested :yesnod: :yesnod:
MTI 427 ROADSTER
#53
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2001
Location: Dallas Tx
Posts: 8,392
Received 571 Likes
on
292 Posts
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
Re: GP on new FAST intake manifold from LG Motorsports (MTI 427 Roadster)
We will have 1 test manifold in 2 to 3 weeks. There will only be a few of these out there for testing. If all is ok with these pre production units, then the full production will begin. We will be doing testing the same day that I get one, and I will post results.
After the independant tests are complete it should be only 3 more weeks until the full production runs are started.
The only pricing info that I was given today was that it will be less than $995 but more than $800. So I believe that is the range.
The test results will ultimately establish the demand. Better results=more demand.
I personally want to see enough improvement so we can unleash some of horsepower that is now limited by the inlet manifold restriction. We plan to try it on a stock C5, a built engine (cam and head package), and a big cu in engine to get results with different levels of modification.
I will keep you posted.
Please continue to email me at Lou@LGMotorsports.com and put FAST MANIFOLD in the subject line. I will broadcast an email to all of you the minute we bolt the test unit on a car.
Thanks
Lou G
#56
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2001
Location: Dallas Tx
Posts: 8,392
Received 571 Likes
on
292 Posts
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
Re: GP on new FAST intake manifold from LG Motorsports (HWY318Runner)
Got your email.
thanks guys. The response has been great. I am pushing them to get going, so we can all sell our LS6 manifolds :lol:
I have 3 cars lined up for testing. One stock with LS6 manifold, one cam and head package, and one 418cu in stroker. This should give us a very good idea on the hp numbers.
Thanks
LG
#57
Le Mans Master
Member Since: Jan 2001
Location: San Leandro California
Posts: 5,564
Likes: 0
Received 0 Likes
on
0 Posts
Re: GP on new FAST intake manifold from LG Motorsports (LG Motorsports)
Got your email.
thanks guys. The response has been great. I am pushing them to get going, so we can all sell our LS6 manifolds :lol:
I have 3 cars lined up for testing. One stock with LS6 manifold, one cam and head package, and one 418cu in stroker. This should give us a very good idea on the hp numbers.
Thanks
LG
thanks guys. The response has been great. I am pushing them to get going, so we can all sell our LS6 manifolds :lol:
I have 3 cars lined up for testing. One stock with LS6 manifold, one cam and head package, and one 418cu in stroker. This should give us a very good idea on the hp numbers.
Thanks
LG
I'm considering the LS6 manifold you have to offer but I would like to know what effect it will have if I go with a H/C and TTi or SC package. Will be watching - thanks!
:cheers:
#59
Team Owner
Member Since: Dec 2000
Location: D*ck ina Box
Posts: 58,783
Likes: 0
Received 0 Likes
on
0 Posts
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: GP on new FAST intake manifold from LG Motorsports (LG Motorsports)
The only pricing info that I was given today was that it will be less than $995 but more than $800. So I believe that is the range.
#60
Drifting
Member Since: Aug 2003
Location: Apopka FL
Posts: 1,951
Likes: 0
Received 0 Likes
on
0 Posts
Re: GP on new FAST intake manifold from LG Motorsports (Mean Blue Z02)
The only pricing info that I was given today was that it will be less than $995 but more than $800. So I believe that is the range.
damn....hopefully it'll provide header-type numbers for that kinda money :)
damn....hopefully it'll provide header-type numbers for that kinda money :)