C5 Tech Corvette Tech/Performance: LS1 Corvette Technical Info, Internal Engine, External Engine, Tech Topics, Basic Tech, Maintenance, How to Remove & Replace
Sponsored by:
Sponsored by:

Fast intake

Thread Tools
 
Search this Thread
 
Old 09-29-2018, 09:26 PM
  #1  
99torchredlb
Pro
Thread Starter
 
99torchredlb's Avatar
 
Member Since: Dec 2004
Location: L. B. Ca
Posts: 669
Received 22 Likes on 13 Posts

Default Fast intake

thinking about getting another mod for my C5 …………….fast intake and new throttle body......is it worth the $1500 dollars...…….right now have comp cam, stage 2 heads, long tubes...and few other mods...…….
Old 09-30-2018, 07:16 AM
  #2  
jumpmanmb87
Burning Brakes
 
jumpmanmb87's Avatar
 
Member Since: Feb 2007
Location: Raleigh, NC
Posts: 855
Received 49 Likes on 41 Posts

Default

Good for about 10-15 I belive depending on the setup.... I gained 12hp with a fast 92 and ls2 TB non ported. You will take the full benefit since you have heads done, that's my next step.
The following users liked this post:
99torchredlb (09-30-2018)
Old 09-30-2018, 11:03 AM
  #3  
jglassmaker
Pro
 
jglassmaker's Avatar
 
Member Since: Jun 2015
Location: Madison WI
Posts: 526
Received 97 Likes on 68 Posts
Default

I upgraded to a Fast 92 & CNC ported LS2 tb and noticed better throttle response and a bit more power from the butt dyno - have not run on the real dyno after yet.
In total it cost me about $1,000 for a used Fast 92 and LS2 TB so maybe not the best HP per $ but you are like me and running out of non-power adder options for more power.

Last edited by jglassmaker; 09-30-2018 at 11:04 AM.
The following users liked this post:
99torchredlb (09-30-2018)
Old 09-30-2018, 11:32 AM
  #4  
99torchredlb
Pro
Thread Starter
 
99torchredlb's Avatar
 
Member Since: Dec 2004
Location: L. B. Ca
Posts: 669
Received 22 Likes on 13 Posts

Default

Originally Posted by jglassmaker
I upgraded to a Fast 92 & CNC ported LS2 tb and noticed better throttle response and a bit more power from the butt dyno - have not run on the real dyno after yet.
In total it cost me about $1,000 for a used Fast 92 and LS2 TB so maybe not the best HP per $ but you are like me and running out of non-power adder options for more power.
Options are limited...…...7,000 for super charger...….a little to much...bigger cam than have smog issues...…….
Old 09-30-2018, 11:54 AM
  #5  
itsslow98
Instructor
 
itsslow98's Avatar
 
Member Since: Jan 2012
Location: Bel Air Maryland
Posts: 241
Likes: 0
Received 28 Likes on 24 Posts
Default

It's worth 20+ if you buy one ported. There is a lot that can be done porting wise that will help over bolting a stock one on.

Get notified of new replies

To Fast intake




Quick Reply: Fast intake



All times are GMT -4. The time now is 03:20 AM.