Just finished my first cam!
#1
Instructor
Thread Starter
Just finished my first cam!
A few months ago, I had installed XSP long-tube headers. These past two weeks I installed a 160* thermostat, Blackwing, and TSP 228r cam.
This was not my first major engine work by any means, but it was my first major work on an LS1.
I thought I would share a video of the car idling, a few minutes after first start. I am getting it tuned this week by New Era here in Rochester.
This was not my first major engine work by any means, but it was my first major work on an LS1.
I thought I would share a video of the car idling, a few minutes after first start. I am getting it tuned this week by New Era here in Rochester.
#3
1/4 mile/AutoX
#4
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 343,365
Received 19,407 Likes
on
14,033 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Nice - love the sound.
#7
Instructor
Thread Starter
Car went to the dyno today, and put down 380 rwp, 363 ft/lbs.
Complete mod list:
XS Power long tube headers
Blackwing air filter
160* thermostat
25% under drive pulley
TSP 228r cam (228/228/.600/.600/112 LSA)
Complete mod list:
XS Power long tube headers
Blackwing air filter
160* thermostat
25% under drive pulley
TSP 228r cam (228/228/.600/.600/112 LSA)
The following users liked this post:
WildRide357 (10-14-2016)