Intermittent valve train tick post MS4 Cam install
#1
Instructor
Thread Starter
Member Since: Jan 2010
Location: Oak Harbor WA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Intermittent valve train tick post MS4 Cam install
'03 Z06
We did the install over the weekend and the car runs pretty well, untuned as of now(in the works of course).
Car has LG super pro headers and X, B&B bullets.
Cam kit can from Texas speed and included; cam, springs, and pushrods.
There seems to be a intermittent noticeable valve train tick that I can not match up to anything in particular. Oil pressure hangs out at 35psi at idle and climbs accordingly.
Tuning issue? Valve train issue?
We did the work and are 100% sure the O ring is not crimped on the oil pump.
I would love some opinions, thanks everyone.
We did the install over the weekend and the car runs pretty well, untuned as of now(in the works of course).
Car has LG super pro headers and X, B&B bullets.
Cam kit can from Texas speed and included; cam, springs, and pushrods.
There seems to be a intermittent noticeable valve train tick that I can not match up to anything in particular. Oil pressure hangs out at 35psi at idle and climbs accordingly.
Tuning issue? Valve train issue?
We did the work and are 100% sure the O ring is not crimped on the oil pump.
I would love some opinions, thanks everyone.