ScreaminDemon

Seems like I saw where someone had posted where to get all the torque specs for any model vehicle in the past but I can't find it. I need it for a 99', I also would like the stock cam specs for a 99' and stock head specs for a 2001 LS6 head? Also, LGM or ARE head/cam package-I can't decide. Lou wants my computer, Nick can just send my a program. Any thoughts?

Thanks in advance! (I love this place!)

David

JWSchmidt3

David, I picked up 9 rwhp & 5 rwtq from Lou's PCM work. It's very good, and only took one try. You know my vote, so good luck with your decision. :cheers:

ScreaminDemon

Thanks for the reply John, but I'm sure you had your car on his dyno and he's not as conveinent to me.(Well, it's not that far) Anybody have info on those torque specs???

JWSchmidt3

The tuning was not done on the dyno. The PCM was sent off to his PCM guy, just like yours would be. :cheers:

shftn6

ttt

ScreaminDemon

They are both the best, but I think I'm going to go with ARE. I can e-mail them my mods, then they make the program with their H/C specs, and just ship that to me to download, and if I do more mods later, I just send the program back for the upgrade. And the package is about $500 cheaper.

BluVette

Re: Stock torque specs
http://metricchemical.com/C5torque.PDF

:cheers:

ScreaminDemon

Thanks for that link.... :cheers:

ScreaminDemon

I'm sending you some mail...

David

ScreaminDemon

Can someone please tell me how to print out these pages. I'm allittle computer illiterate, I don't know how to save them to disk and then print them out. They open in Adobe Acrobat. Thanks

David

2KFRC5

Once you open the link, on the Acrobat Reader tool bar there should be the printer icon. Just click.
I also saved the link to my Favorites, on my MS Internet Explorer.

ScreaminDemon

I'll click file, I'll click print, and then a window pops up saying 'print to file' and wants to know where to save it? :confused:I've got it bookmarked, but I can't print it out. Can someone e-mail me the pages and then I can print it out?? I do not see a printer icon.
Nevermind-it was in my printer linkup, I've got it now, thanks


David


[Modified by ScreaminDemon, 11:37 AM 2/2/2002]


[Modified by ScreaminDemon, 3:07 PM 2/2/2002]

BlackZee06

Just an FYI. GM service bulletin 01-06-01-027 dated 11/2001 advises of a revision to cylinder head installation and cylinder head replacement procedures within the engine unit repair and engine mechanical subsections of the service manuals. Earlier service information allowed reuse of the M8 cylinder head bolts. The revised service information requires replacement of the M8 cylinder head bolts.

ScreaminDemon

I wouldn't reuse headbolts but thanks for the good info... :seeya