Difficulty changing C5 diff. Is it a DIY mod for old guys?
#1
Instructor
Thread Starter
Member Since: May 2000
Location: Salem, Oregon OR
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Difficulty changing C5 diff. Is it a DIY mod for old guys?
I have purchased a 3.15 diff for my 2.73 A4. I have the PowerLoader II from Cole ready to install. I have a buddy who has a shop that we can do the change. We recently put on a front suspension with disc brakes, a new 340 engine, 518 O/D auto tranny and a 3.91 SureGrip diff with SS springs in my '68 Dart. We did all of that with an engine puller, floor jack and 2 weeks of work. He is questioning if we can change the diff on my '98 C5 without a lift. He is concerned about doing this change on the floor with only a floor jack. We have extensive experience building and playing with racecars and streetcars. My question to the Forum is: Is it possible to do this "diff change" on the floor of his shop. (We have airtools) We are both retired guys and spend our time playing with cars. Is this too physical a job for a couple of old guys? How much does it cost to have it done at the dealer, or, a competent garage?
#3
Instructor
Thread Starter
Member Since: May 2000
Location: Salem, Oregon OR
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Re: Difficulty changing C5 diff. Is it a DIY mod for old guys? (200MPH)
I have the data that was posted on the forum for, "How to change the C5 diff". I believe it came out of Corvette Fever mag. Any tips on shortcuts or do's and don'ts?
#4
Team Owner
Member Since: Dec 2000
Location: D*ck ina Box
Posts: 58,783
Likes: 0
Received 0 Likes
on
0 Posts
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: Difficulty changing C5 diff. Is it a DIY mod for old guys? (1Saint)
#6
Race Director
Re: Difficulty changing C5 diff. Is it a DIY mod for old guys? (200MPH)
Did mine myself. I thought it was pretty easy.
#7
Instructor
Re: Difficulty changing C5 diff. Is it a DIY mod for old guys? (Bluewasp)
Heads, cam, intake, pulley, headers, TC, rearend, and ed wright programming. It only looked like that for about a week.
#8
Racer
Member Since: Aug 1999
Location: 26 NM out the 304 radial of the ORD VOR Illinois
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Re: Difficulty changing C5 diff. Is it a DIY mod for old guys? (1Saint)
Well, what did we decide, can this change be done without a lift? Can it be done with just a couple of floor jacks and stands?
#9
Team Owner
Member Since: Apr 2001
Location: S.W. Ohio. . . . . . NRA Life Member
Posts: 54,199
Received 173 Likes
on
107 Posts
Re: Difficulty changing C5 diff. Is it a DIY mod for old guys? (Supercharged)
I just finished this job myself a week ago. Instead of reproducing everything, just visit my web site; under "Mods Page".
It can be done without a lift.
mikemercury.home.att.net
It can be done without a lift.
mikemercury.home.att.net
#10
Instructor
Re: Difficulty changing C5 diff. Is it a DIY mod for old guys? (Supercharged)
The car never went up any higher then in my picture. 4 jack stands and 2 floor jacks worked great for me.
#11
Melting Slicks
Re: Difficulty changing C5 diff. Is it a DIY mod for old guys? (Buckmaster)
Had mine done by CARTEK and I must say anyone doing this change without a lift and some of the tools they used, earns my respect. IMHO didn't consider this change to be of the garage/shade tree mechanic variety. Once again, well done to those who have...
Joe
Joe