I'm partial to this sound....LOL
http://videos.streetfire.net/video/5...02-A_58201.htm
Which happens to be an exhaust I fabricated utilizing the Ti Muffs and an electric cutout including a fabricated "Y" pipe just before the muffler allowing the exhaust gases to bypass the Ti mufflers and head directly to the single oval exhaust tips (with the cut-out open.....closed its business as usual forcing all the exhaust gas thru the Ti mufflers creating a pleasant nice sounding drone free cruise).
Truth is the exhaust gas will actually still be able to go thru the muffler with the cut-outs open (just creating a pressure balance), but most rushes straight thru to the tips via the "short circuit pipe" I open with electric cut-outs (think Ti mod with an electric cut-out in line). In my case the cut-outs more represent a muffler bypass more than anything else using the Ti muffler as a resonator of sorts at WOT.
Sounds wicked both in and out of the car at WOT....V-8 rumble with a high RPM shrill attached like an exotic (best of both worlds IMO). The results of this work were better than I hoped but it was very time consuming to fabricate and that made it a little sweeter in the end. Im still getting over all the "welding burn" from that adventure
-Tony