427 Idle Video
#1
Le Mans Master
Thread Starter
427 Idle Video
I had some requests for an idle video. I shot this one a few minutes ago.
The cam is a Comp XE-R 230/242 .591/.610 115+0. I have the idle set at 950 for now. I may lower it once I start tuning. The exhaust consists of Supermaxx headers with cats and a Z06 cat back.
I have about 150 miles on it as of today. It is running great. I wanted to use a cam that is about as drivable as stock and that is what I ended up with. The car will loaf along at and pull from 1000 rpm in 6th if you want it to and have no surging or bucking. It idles in traffic with zero issues.
Mark
The cam is a Comp XE-R 230/242 .591/.610 115+0. I have the idle set at 950 for now. I may lower it once I start tuning. The exhaust consists of Supermaxx headers with cats and a Z06 cat back.
I have about 150 miles on it as of today. It is running great. I wanted to use a cam that is about as drivable as stock and that is what I ended up with. The car will loaf along at and pull from 1000 rpm in 6th if you want it to and have no surging or bucking. It idles in traffic with zero issues.
Mark
Last edited by 7LitreC5; 05-29-2007 at 09:09 PM.
#3
Melting Slicks
Sounds nice.I put in the same short block, SDPC 427,But I have PP heads.You will love it once you break it in.Good luck ...................Paul
#6
Melting Slicks
I have alittle over 1700 miles on it,Run's great!.I drive down to Raceway Park NJ,About 125 miles there,Dragrace,About 3 or 4 passes because I can't get out of friggin 1st round ,Drive back home and I had to add a 1/2 qt of oil.I'm not worried about that,Its still breakin in I've been using Shell Rotella 15-40 like SDCP said.I've changed a few times already.I'll put synthetic in at 5000mi.Let me know how your's is doing after a few thousand miles .....................Paul
#7
Le Mans Master
nothin beats the sound of a 427...got one myself. do yourself a favor and throw some exhaust cutouts on her, then you'll REALLY love the sound!
here was my short lil vid of the exhaust...
http://www.youtube.com/watch?v=Bfig6XkkA-8
Aj
here was my short lil vid of the exhaust...
http://www.youtube.com/watch?v=Bfig6XkkA-8
Aj
#8
Le Mans Master
Thread Starter
Hi Paul,
I don't think that I have used any oil yet (other than what leaked out because they drilled the dipstick hole too shallow and too large in diameter). I am using one of the other oils that SDPC recommends, Valvoline NSL Racing 10w-30.
Mark
I don't think that I have used any oil yet (other than what leaked out because they drilled the dipstick hole too shallow and too large in diameter). I am using one of the other oils that SDPC recommends, Valvoline NSL Racing 10w-30.
Mark
I have alittle over 1700 miles on it,Run's great!.I drive down to Raceway Park NJ,About 125 miles there,Dragrace,About 3 or 4 passes because I can't get out of friggin 1st round ,Drive back home and I had to add a 1/2 qt of oil.I'm not worried about that,Its still breakin in I've been using Shell Rotella 15-40 like SDCP said.I've changed a few times already.I'll put synthetic in at 5000mi.Let me know how your's is doing after a few thousand miles .....................Paul
#9
Le Mans Master
Thread Starter
Sounds awesome!
nothin beats the sound of a 427...got one myself. do yourself a favor and throw some exhaust cutouts on her, then you'll REALLY love the sound!
here was my short lil vid of the exhaust...
http://www.youtube.com/watch?v=Bfig6XkkA-8
Aj
here was my short lil vid of the exhaust...
http://www.youtube.com/watch?v=Bfig6XkkA-8
Aj
#10
Safety Car
I had some requests for an idle video. I shot this one a few minutes ago.
The cam is a Comp XE-R 230/242 .591/.610 115+0. I have the idle set at 950 for now. I may lower it once I start tuning. The exhaust consists of Supermaxx headers with cats and a Z06 cat back.
I have about 150 miles on it as of today. It is running great. I wanted to use a cam that is about as drivable as stock and that is what I ended up with. The car will loaf along at and pull from 1000 rpm in 6th if you want it to and have no surging or bucking. It idles in traffic with zero issues.
Mark
The cam is a Comp XE-R 230/242 .591/.610 115+0. I have the idle set at 950 for now. I may lower it once I start tuning. The exhaust consists of Supermaxx headers with cats and a Z06 cat back.
I have about 150 miles on it as of today. It is running great. I wanted to use a cam that is about as drivable as stock and that is what I ended up with. The car will loaf along at and pull from 1000 rpm in 6th if you want it to and have no surging or bucking. It idles in traffic with zero issues.
Mark
Who spec'ed the cam??
Please post dyno numbers.
#11
Le Mans Master
Member Since: Dec 2005
Location: Port Arthur, Texas 77642
Posts: 8,475
Received 331 Likes
on
241 Posts
nothin beats the sound of a 427...got one myself. do yourself a favor and throw some exhaust cutouts on her, then you'll REALLY love the sound!
here was my short lil vid of the exhaust...
http://www.youtube.com/watch?v=Bfig6XkkA-8
Aj
here was my short lil vid of the exhaust...
http://www.youtube.com/watch?v=Bfig6XkkA-8
Aj
#13
Safety Car
#15
Premium Supporting Vendor
Sounds great! Glad you're enjoying it already! Be sure to get some numbers for everyone (dyno and track of course!)!!
__________________
800-456-0211 / PM /E-mail Facebook AIM or Yahoo: JSSDPC
SDPC since 1929 thanks to you guys! WHIPPLE Superchargers, Procharger, Magnuson,
Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, Yella Terra, HPTuners, 7.400" pushrod set (other lengths available)
800-456-0211 / PM /E-mail Facebook AIM or Yahoo: JSSDPC
SDPC since 1929 thanks to you guys! WHIPPLE Superchargers, Procharger, Magnuson,
Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, Yella Terra, HPTuners, 7.400" pushrod set (other lengths available)
Last edited by SDPC; 06-04-2007 at 06:52 PM.
#17
Premium Supporting Vendor
#18
Race Director
Good Lord, Jesus and the Shepherds!!!! You guys keep posting videos like those and a Magnaflow exhaust will be least of my worries. Darned impressive.
Tracy
NSX-PG v3.0
Tracy
NSX-PG v3.0
#19
Safety Car
I beg you, please stop posting these videos..........I have an angel on one shoulder screaming DON'T DO IT! and the saying DO IT MAN.....JUSS DO IT!