Help!

ovred · 09-17-2009, 06:39 AM

Have a 1998 Corvette,starts up fine,runs all day long in
park.Put it in gear and go more then 2 MPH and it dies.Starts right up again.Have no check engine on.Could someone tell me whats going on this.Thanks.

RedRiderZR1 · 09-17-2009, 05:42 PM

Even though you do not have a Check Engine Light I would pull codes. You definitely have something causing this. I don't suppose you get the "pull key and wait 10 sec" either on the DIC? Sounds like it could be a wheel sensor. But you do have to pull the codes off the PCM and post them up. Also, I would move this to the tech section. Get better responses over there.

Billf6531 · 09-17-2009, 08:23 PM

Sounds like a column lock failure to me, since it's speed related. As noted, pull the codes.

ovred · 09-18-2009, 10:58 AM

The car has a Service Column Lock light on if that is any help.What would I need to do to fix this? Thanks

Billf6531 · 09-18-2009, 03:07 PM

Were the GM recalls done for the column lock issues? If done recently, it should still be covered.

RedRiderZR1 · 09-18-2009, 04:38 PM

Or better yet. Just get the CLB from corvettes of houston and be done with it. GMs fix usually isn't the "fix". Definitely the fix for your problem.

tblu92 · 09-19-2009, 05:38 AM

Souds like it is in the "VATS" system--(vehcle anti theft) Try using your spare key--If all ease fails just have the VATS disabled by a tuner