throwing codes B0361 and B0441
#1
Instructor
Thread Starter
throwing codes B0361 and B0441
I cleared my history codes and these 2 codes come back immediately after reset as history codes under 99 HVAC. B0361 H and B0441 H. Does anyone know what they are and the fix for them?
#2
Advanced
DTC B0361 is for the left air temperature actuator.
The "H" at the end of the DTC is for History, not a problem.
The DTC will become history if the HVAC control module no longer detects a failure. This DTC will clear after 100 fault free ignition cycles or cleared with a scan tool.
DTC B0441 is for the left air temperature actuator also. The air temperature actuator actual total travel range is less than or more than the calibrated limits. It will take 40 fault-free ignition cycler to clear or cleared with a scan tool.
Hope this will help.
The "H" at the end of the DTC is for History, not a problem.
The DTC will become history if the HVAC control module no longer detects a failure. This DTC will clear after 100 fault free ignition cycles or cleared with a scan tool.
DTC B0441 is for the left air temperature actuator also. The air temperature actuator actual total travel range is less than or more than the calibrated limits. It will take 40 fault-free ignition cycler to clear or cleared with a scan tool.
Hope this will help.