Need help installing a Innovative LC1 and NB gauge

teddyca · 05-30-2007, 04:09 PM

I took the car down and had the bung welded in and the 02 connected. I have the LC1 box under the hood and have a ton of wires to connect it. I did not get any documentation on the kit so I have no idea where to start. I will also head over to Innovative but figured I would ask here as well. Also I have a Autometer NB A/F gauge that I was told can connect directly to the LC1. Need to know which wire connects to the gauge? Thanks for all your help.

BLOWNZO6 · 05-31-2007, 12:27 AM

There are a lot of posts on this, but I will make it easy for you.

Don't waste your time installing this and hooking it up to a narrow band gage. The data will be worthless.

Get a wideband gage and install it properly.

RJW · 06-02-2007, 01:32 PM

Beer99C5@FastbirdPerf.com · 06-02-2007, 03:29 PM

http://www.innovatemotorsports.com/s...C-1_Manual.pdf

'VETTE PHASE · 06-03-2007, 04:33 PM

http://www.ls1tech.com/forums/showthread.php?t=419524