Need tuner in NC for new motor and suspension codes...

schpenxel · 06-05-2006, 04:27 AM

Well, I'm building a LS6 based (at around 10.7:1 compression with my milled heads) engine to put in my car very soon. It will have a forged bottom end, G5X3 114 cam, stage 2 heads from MTI milled .030, either FAST or LS6 intake, 90mm TB, long tube headers and at least a 200 shot of nitrous...

Also, I have changed the stock suspension over to coil overs. I also have some other issues with the active handling system (steering wheel angle sensor randomly "blips" and causes it to go hay wire..locking the brakes and almost causing me to wreck a few times now). I want the active handling system and ride control system both completely programmed out of the computer so I do not get any error codes and do not have to hit reset 100x everytime I start the car, AND don't have to worry about it messing up and throwing me towards a wall again. Can (and will..) most dealerships program this out for me??

Anyways, is there any local tuners (To NC'ish) that anyone can reccomend and possibly give me some idea on cost??

Thanks!
Carson

kiley2418 · 06-05-2006, 04:32 AM

yeah, jeff creech in durham can.

schpenxel · 06-05-2006, 04:38 AM

cool...I'm in Raleigh, might work out great!

kiley2418 · 06-05-2006, 04:50 AM

sent you a pm

chiefDave · 06-17-2006, 04:26 PM

Quote:

Originally Posted by kiley2418

yeah, jeff creech in durham can.

Jeff is the man. See link in Sig
Dave

schpenxel · 06-17-2006, 04:43 PM

Well.. Jeff's guy at the dealership couldn't get the ride control stuff removed from the computer and the codes for the active handling are back... wtf