Turbo Tech Stage I Twin Turbo kit Plus more!
09-03-2004, 09:27 PM
#1
Melting Slicks
Thread Starter
Turbo Tech Stage I Twin Turbo kit Plus more!
I am selling my Stage I Turbo Tech kit and other associated hardware as complete package. This is the same kit that was featured on my car in Corvette magazine.
http://www.turbotechnologyinc.com/C5ARTICLE.htm
This setup as being sold will make 450/450 safely or more and run well into the 11’s at over 120mph on runflats and a stock engine. This package will yield perfect street manners with stock drivability until awaken. Full boost is typically seen by 2600rpm for the big low end grunt.
I am currently working with George at TTi on a Stage X package and it’s about wrapped up, so now the Stage I must go.
The components have approximately 3000 miles on them and function perfectly. They are not however in “beauty queen” shape as they have been on and off quite a few times as the ceramic coating has its share of marks.
Package includes
*Turbo Tech Stage I Twin Turbo kit with twin intercoolers.
http://www.turbotechnologyinc.com/ls1_corvette.htm
* LS6 Intake Manifold including block offs and crossover
* Bosch 42# injectors (Will support 575rwhp +)
* Comp 918 Valve springs
* 7.400” Chromemoly pushrods.
$4750 shipped to your door
Phil
http://www.turbotechnologyinc.com/C5ARTICLE.htm
This setup as being sold will make 450/450 safely or more and run well into the 11’s at over 120mph on runflats and a stock engine. This package will yield perfect street manners with stock drivability until awaken. Full boost is typically seen by 2600rpm for the big low end grunt.
I am currently working with George at TTi on a Stage X package and it’s about wrapped up, so now the Stage I must go.
The components have approximately 3000 miles on them and function perfectly. They are not however in “beauty queen” shape as they have been on and off quite a few times as the ceramic coating has its share of marks.
Package includes
*Turbo Tech Stage I Twin Turbo kit with twin intercoolers.
http://www.turbotechnologyinc.com/ls1_corvette.htm
* LS6 Intake Manifold including block offs and crossover
* Bosch 42# injectors (Will support 575rwhp +)
* Comp 918 Valve springs
* 7.400” Chromemoly pushrods.
$4750 shipped to your door
Phil
09-03-2004, 11:18 PM
#6
Melting Slicks
Thread Starter
Stage X is something that George at TTi and I are colaborating on.
You know how it is. Bigger,Badder and all that.
The original kit is design for street use,pump gas on 346 cui. On large displacent engines or looking to put 15psi plus at high rpms there needed to be some design changes.
I can tell ya though, I do miss full boost by 2600rpm and the overall street feel of the stage I.
Phil
You know how it is. Bigger,Badder and all that.
The original kit is design for street use,pump gas on 346 cui. On large displacent engines or looking to put 15psi plus at high rpms there needed to be some design changes.
I can tell ya though, I do miss full boost by 2600rpm and the overall street feel of the stage I.
Phil
09-04-2004, 09:29 AM
#11
Melting Slicks
Thread Starter
Originally Posted by ramcharger
How is George lately? He's usually only in a good mood when he wins his drag races. Has he been winning?
He made it to the final round in Seattle when NHRA came true, it was like he came back weeks long vacation..hahah to funy
Phil
09-04-2004, 09:33 AM
#12
Melting Slicks
Thread Starter
Originally Posted by sacsrpc
Is the kit taken? If not I will take it!!
Any discount for pickup??
Any discount for pickup??
Jon (xcelor8) has first dibs on it, I think he need his wifes permission.
I can put you on the list as #2 if he back out. I will knock some change off for ya on the shippin.
CNB, The line is now 2 deep I belive...
If you guys want, my PM box is now emptied (cant believe it filled up so fast) shoot me a PM with any questions.
Phil