FS: Corbeau Evo custom seats
#3
Instructor
These look great. Any chance you know if they were installed reverse in a C5 (passanger seat in driver position like the A4s) that it could fit in without the belt swap?
#5
Le Mans Master
No they dont get swapped from side to side and will not fit with the floor mounted C5 seat belt retractor. You will need to go to harness bar and these harnesses on C5.
That said you can easily convert these to fixed back seats using an L bracket one side but would need to create that bracket using something like this Amazon.com: 4 Packs 9 Inch Steel L Right Angle Bracket Black Flat Mending Plate Length 9", Width 2", Thickness 3mm, Max Load 90LB Flat Repair Plate Corner Brace for Wooden House, Furniture : Industrial & Scientific
If someone made a decent harness bar for the C5 vert I would be keeping these. As is I have decided to recover the C6 seats I have siting here and install those
That said you can easily convert these to fixed back seats using an L bracket one side but would need to create that bracket using something like this Amazon.com: 4 Packs 9 Inch Steel L Right Angle Bracket Black Flat Mending Plate Length 9", Width 2", Thickness 3mm, Max Load 90LB Flat Repair Plate Corner Brace for Wooden House, Furniture : Industrial & Scientific
If someone made a decent harness bar for the C5 vert I would be keeping these. As is I have decided to recover the C6 seats I have siting here and install those
these seats and they swap side for side and use all the oem trim and stock seat belts.. not sure why yours are different.