FS: Single Turbo- Top mount Setup
#1
Melting Slicks
Thread Starter
FS: Single Turbo- Top mount Setup
Time to sell my turbo setup. Its all off the car and laying on my garage floor waiting for a new home. This setup was built by hand by me. The Hotside pipes I tacked together and had professionally tig welded. The manifold is made from Schedule 10 weld els and piping. It is MUCH thicker and stronger than what other guys use. This setup is tested, proven and documented on these forums. I put about 1500 miles on the setup before removing it. Turbo still has like new shaft play. This setup makes over 600RW with ease and has a Torque curve that makes the centri guys jealous. :P The spool and response is nearly instant. The dyno sheet was a forged 9:1 347 with stage 3 blower cam. Pump gas only, no meth.
This setup does retain AC. The hood support where the light is mounted has to be notched a little so the hood will close all the way. It does require the radiator to be laid down just like any supercharger kit. You will also have to tap the oil pan for an oil return line, again like most Centri's these days. It includes the midpipe and bolts right up to your factory or aftermarket mufflers.
My price is $3600 SHIPPED. And keep in mind this will be several big heavy boxes...so shipping wont be cheap.
Feel free to message me with any questions. I work a lot..and wierd hours. but will do my best to respond quickly.
The turbo is a Turbonetics TC-76 Hurricane Vanessa.
XSPower wastegate(it worked perfectly)
ECS Intercooler
Tial 50mm BOV
K&N air filter
Build threads:
https://www.corvetteforum.com/forums...c76-build.html
https://www.corvetteforum.com/forums...8-results.html
This setup does retain AC. The hood support where the light is mounted has to be notched a little so the hood will close all the way. It does require the radiator to be laid down just like any supercharger kit. You will also have to tap the oil pan for an oil return line, again like most Centri's these days. It includes the midpipe and bolts right up to your factory or aftermarket mufflers.
My price is $3600 SHIPPED. And keep in mind this will be several big heavy boxes...so shipping wont be cheap.
Feel free to message me with any questions. I work a lot..and wierd hours. but will do my best to respond quickly.
The turbo is a Turbonetics TC-76 Hurricane Vanessa.
XSPower wastegate(it worked perfectly)
ECS Intercooler
Tial 50mm BOV
K&N air filter
Build threads:
https://www.corvetteforum.com/forums...c76-build.html
https://www.corvetteforum.com/forums...8-results.html
Last edited by MawneeC5; 09-11-2014 at 10:49 PM.
#3
Melting Slicks
Thread Starter
#6
Melting Slicks
Thread Starter
#8
Melting Slicks
Thread Starter
#14
Melting Slicks
Thread Starter
#19
Melting Slicks
Thread Starter