FS: CCW Wheels, C6 Z51 Brakes, Speaker Plates
#1
Instructor
Thread Starter
FS: CCW Wheels, C6 Z51 Brakes, Speaker Plates
For Sale: Two front CCW 5005A wheels polished all the way through the barrel/rim. They are 18X10, have a two inch lip on the outside and will fit standard C6, C4, C5, and camaro. Wheels are in excellent condition, no damage. These wheels look incredible in person. You can order any size rears from CCW for a complete set. Don't settle for heavy cast wheels. New was $1,400. REDUCED $850 OBO + Shipping.
Z51 Brakes: Calipers, Brackets, Brake lines, Rotors almost at wear limited but work great powder coated, Brake pads almost at wear limit but work great. SOLD
C6 Z06 Stock Rear Spoiler
Larger than Standard C6 spoiler takes about 20 minutes to install.
Like new condition, Sorry no pictures. SOLD
CNC Machined C5 / C6 Door Speaker Mounting Plates
Sold by Nakidparts.com new $50 yours for $40 + Shipping never used.
So you're looking to upgrade the speakers in your C5 / C6 or Z06 and you need a way to mount an aftermarket driver in the stock openings. You could use plywood and make the shape yourself, but if you're really into audio then you'll be concerned that wood will absorb moisture and may not be stiff enough to get the most out of the drivers you just dumped a TON of money on. We have exactly the what you need, an exact fit, CNC machined mounting plate made of 5mm (approx 0.205") thick high pressure canvas phenolic laminate. This premium material is extremely dense which makes it very moisture resistant and also very stiff, ready to handle hardest hitting drivers.
Z51 Brakes: Calipers, Brackets, Brake lines, Rotors almost at wear limited but work great powder coated, Brake pads almost at wear limit but work great. SOLD
C6 Z06 Stock Rear Spoiler
Larger than Standard C6 spoiler takes about 20 minutes to install.
Like new condition, Sorry no pictures. SOLD
CNC Machined C5 / C6 Door Speaker Mounting Plates
Sold by Nakidparts.com new $50 yours for $40 + Shipping never used.
So you're looking to upgrade the speakers in your C5 / C6 or Z06 and you need a way to mount an aftermarket driver in the stock openings. You could use plywood and make the shape yourself, but if you're really into audio then you'll be concerned that wood will absorb moisture and may not be stiff enough to get the most out of the drivers you just dumped a TON of money on. We have exactly the what you need, an exact fit, CNC machined mounting plate made of 5mm (approx 0.205") thick high pressure canvas phenolic laminate. This premium material is extremely dense which makes it very moisture resistant and also very stiff, ready to handle hardest hitting drivers.
Last edited by c6sutton; 03-16-2014 at 01:28 AM.