Setrab Oil Cooler Kit Chevy LS Motors
#1
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Setrab Oil Cooler Kit Chevy LS Motors
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
Kits ContainsThese kit handles the cooling for 450-550HP
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
Last edited by Xplosive Performance; 01-12-2013 at 01:56 PM.
#2
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
Kits Contains- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
$729.85
Last edited by Xplosive Performance; 01-12-2013 at 01:58 PM.
#3
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
Last edited by Xplosive Performance; 01-12-2013 at 01:59 PM.
#4
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
Last edited by Xplosive Performance; 01-12-2013 at 01:59 PM.
#5
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
Last edited by Xplosive Performance; 01-12-2013 at 02:00 PM.
#6
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
Last edited by Xplosive Performance; 01-12-2013 at 02:00 PM.
#7
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
Last edited by Xplosive Performance; 01-12-2013 at 02:00 PM.
#8
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
Last edited by Xplosive Performance; 01-12-2013 at 02:01 PM.
#9
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
Last edited by Xplosive Performance; 01-12-2013 at 02:01 PM.
#10
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
Kits Contains
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
Last edited by Xplosive Performance; 01-12-2013 at 02:01 PM.
#11
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
Last edited by Xplosive Performance; 01-12-2013 at 02:01 PM.
#12
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
Last edited by Xplosive Performance; 01-12-2013 at 02:02 PM.
#13
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
Last edited by Xplosive Performance; 01-12-2013 at 02:02 PM.
#14
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
Last edited by Xplosive Performance; 01-12-2013 at 02:02 PM.
#15
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
Last edited by Xplosive Performance; 01-12-2013 at 02:02 PM.
#16
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
#17
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
These kit handles the cooling for 450-550HP
Kits Contains
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
#18
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
Kits ContainsThese kit handles the cooling for 450-550HP
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
$729.85
#19
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
Kits ContainsThese kit handles the cooling for 450-550HP
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
http://www.xplosiveperformance.com/9...AN_p_3301.html
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85
#20
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Everything you need to install a external oil cooler on your LS Series Engine.
- All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
- NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans
We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP
Kits ContainsThese kit handles the cooling for 450-550HP
- (1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
- (1) 9-Series Setrab Oil Cooler Mounting Bracket
- (1) Low Profile Low-profile oil cooler adapter block
- (2) Black Anodizied -10AN Adapter Fittings
- (2) 22mm - 10AN Cooler Adapter Fittings
- (3) -10 AN 90 Hose Ends
- (1) -10 AN 120 Hose End
- 10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
- Please Note assembly of fittings to hoses/fittings to cooler are required.
- For Preassembled hoses and fittings see Kit 3301
- $699.85
KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
http://www.xplosiveperformance.com/9...AN_p_3301.html
KIT INCLUDES EVERYTHING YOU NEED.
(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator
http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85