PARTING OUT 3 Vettes: 03 Z06, 01 Vert, 99 Coupe
04-20-2014, 04:41 PM
#582
I need the spring loaded cover (black) for the drivers side seat belt on my convertible - it resides behind the drivers seat and is in the up position when the top is up and covers the seat belt hinge when the top is down.
This is the cover that you have to lift when adjusting the convertible to not allow the window to the hit the fabric.
This is the cover that you have to lift when adjusting the convertible to not allow the window to the hit the fabric.
04-20-2014, 04:42 PM
#583
I need the spring loaded cover (black) for the drivers side seat belt on my convertible - it resides behind the drivers seat and is in the up position when the top is up and covers the seat belt hinge when the top is down.
Guessing size it my be 3" x 4" and lifts up and down.
This is the cover that you have to lift when adjusting the convertible to not allow the window to the hit the fabric.
Guessing size it my be 3" x 4" and lifts up and down.
This is the cover that you have to lift when adjusting the convertible to not allow the window to the hit the fabric.
04-20-2014, 06:59 PM
#584
Drifting
Looking for a front fascia/bumper in good shape, preferably Sebring Silver, for a 2000 C5. Let me know when you get a good one, thanks.
And a good clear lexan top.
And a good clear lexan top.
04-21-2014, 10:26 AM
#586
Supporting Vendor
Thread Starter
Member Since: May 2010
Location: Bell Buckle, TN
Posts: 6,811
Received 232 Likes
on
134 Posts
St. Jude Donor '11
for 2001 C5 Vert. I need a few trivial things that would literally fit in a small envelope....
1) one Torx screw that holds the painted Headlight cover down (it screws in from the sides)
2) one twist-in black plastic Headlight adjustment port cover. Its about 2" diameter and it has an indentation to 1/4 turn it in with a coin.
3) one gray plastic lug nut cap/cover.
4) from a door panel, I need one small black plastic cover for the 2 door handle screws, only if all of the plastic tabs are intact. (mine has broken tabs and is currently glued on)...
Let me know if you got them, and what it'll take to mail'em to NC.
Thanks and good luck with your part-outs!
1) one Torx screw that holds the painted Headlight cover down (it screws in from the sides)
2) one twist-in black plastic Headlight adjustment port cover. Its about 2" diameter and it has an indentation to 1/4 turn it in with a coin.
3) one gray plastic lug nut cap/cover.
4) from a door panel, I need one small black plastic cover for the 2 door handle screws, only if all of the plastic tabs are intact. (mine has broken tabs and is currently glued on)...
Let me know if you got them, and what it'll take to mail'em to NC.
Thanks and good luck with your part-outs!I need the spring loaded cover (black) for the drivers side seat belt on my convertible - it resides behind the drivers seat and is in the up position when the top is up and covers the seat belt hinge when the top is down.
This is the cover that you have to lift when adjusting the convertible to not allow the window to the hit the fabric.
This is the cover that you have to lift when adjusting the convertible to not allow the window to the hit the fabric.
I need the spring loaded cover (black) for the drivers side seat belt on my convertible - it resides behind the drivers seat and is in the up position when the top is up and covers the seat belt hinge when the top is down.
Guessing size it my be 3" x 4" and lifts up and down.
This is the cover that you have to lift when adjusting the convertible to not allow the window to the hit the fabric.
Guessing size it my be 3" x 4" and lifts up and down.
This is the cover that you have to lift when adjusting the convertible to not allow the window to the hit the fabric.
$89 shipped.
