pit-man

SOLD !!!!!

239/247 .621”/.632” 113LSA +3 advance (with 1.7 ratio rockers)
Comp HUC/HUC lobes 54-000-11 3 bolt cam core
13050R/13052R HR 113 LSA +3 advance (110 installed intake centerline)

Cam Valve Events 0.006 0.050 0.200
Intake Duration - ID 294 239 158 13050R HUC lobe .621"
Exhaust Duration - ED 302 247 166 13052R HUC lobe .632"
Lobe Center Angle - LSA 113 113 113
Intake Centerline - ICL 110 110 110

Intake Valve opens - IVO 37 9.5 -31 BTDC (- indicates ATDC)
Intake Valve closes - IVC 77 49.5 9 ABDC
Exhaust Valve Opens - EVO 87 59.5 19 BBDC
Exhaust Valve Closes - EVC 35 7.5 -33 ATDC (- indicates BTDC)
Exhaust Centerline - ECL 116 116 116
Overlap 72 17 -64 degrees



$295
Less than 500 miles on cam. Email me if interested at:
bpittman1066@yahoo.com

pit-man

Bump.
No one needs a cam ?

pit-man

Pic of Cam

Jon B.

Might help if you specify the combo this was ground for. GLWTS

pit-man

Thx.

Cam is for LS2 heads/cam combo or a LS2 stroker motor.
Pat-G said he has sold many of these putting out roughly 480 rwhp thru an Auto tranny. It is a little radical with a nice lope to it.

pit-man

Bump...reduced to $250

email me at: bpittman1066@yahoo.com

pit-man

Bump. I don't need this cam laying around the garage. $225

bpittman1066@yahoo.com

pit-man

Here is an idle vid from my phone. I was idled high at 1100rpm, not running a Maf.

http://s895.photobucket.com/albums/a...ps66fe5de4.mp4

pit-man

sold !!!!