You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Corvetteforum.com today!
I have a set of CCW T-10s for sale. They are in near pristine condition. There is a small nic on one of the rears that can be repaired since they are polished aluminum. The tires are Nitto Invos, 285 x 30 x 19 in the front and 305 x 30 x 19 in the rear. The tire tread left is, 4/32s left in the rear. One front has 7/32nds and one is brand new due to a mistake by a body shop. The front wheels are 19x 10 and the rears are 19x11.5. They do not fit big brake kits. They have been sitting around for months now so they will need to be cleaned and polished.
I would prefer a local sale but would explore shipping options. Price is $2,500.
Picture of nic on rear wheel
Last edited by Bigcountry7; 01-06-2013 at 08:36 PM.
Are the rears 11.5 or bigger? it sounded like you weren't sure.. did you use them with fender flares or spacers? also what size lips are on fronts and rears?
Last edited by JFG Racing #1; 09-20-2012 at 11:41 AM.
Are the rears 11.5 or bigger? it sounded like you weren't sure.. did you use them with fender flares or spacers? also what size lips are on fronts and rears?
I am about 90% positive they are 11.5. Definitely not bigger, I didn't run any spacers or flares with them. I will check on the lips for you.
Are the rears 11.5 or bigger? it sounded like you weren't sure.. did you use them with fender flares or spacers? also what size lips are on fronts and rears?
GLWS... As a repeat offender as John calls me... He will only put 11.5 rears on c5's. You cant get the 3" lip with an 11" rear wheel. Your fronts should be 10" as well.
John at CCW can bring up your invoice and tell you what size they are. My CCW SP-16a rears are 19"x11" with a 305/30/19 Nitto Invo.
I bought them from a forum member a couple of years ago and can't find the thread or messages. I called John and he believes they are most likely 19x11 but to be certain I will have them measured.
My mechaninc measured the wheels with measuring calipers, the fronts are 19x10.5 and the rears 19x12.
I bet your mechanic is measuring outer-lip to outer-lip - that's why yours are 1/2" wider than the typical 19" CCW sizes. CCW says the proper way to measure is inner-lip to inner-lip...which would probably make your wheels 19x10 / 19x11.5
I bet your mechanic is measuring outer-lip to outer-lip - that's why yours are 1/2" wider than the typical 19" CCW sizes. CCW says the proper way to measure is inner-lip to inner-lip...which would probably make your wheels 19x10 / 19x11.5
I would imagine you are correct. I thought 19x 10.5 seemed large for the front. I apologize for the confusion. I really should have had this straightened out. I thought I was right to begin with, but when others questioned the correctness of the sizes I posted than I did also and wanted to get to the bottom of it. He definitely did measure outer lip to outer lip which would make the correct sizes what I had originally stated, 19x10 and 19x11.5. Thank you very much for clearing that up for me. I apologize to everyone for my haste. Wheel sizes as you can see, are not my area of expertise.
Corvette Store
FS: CCW T-10s
