z06 vett

i have finally got it running and still have some stuff,
whiting on the details.

i am taking mine back toward stock,
it is the only way to recover some of the 60k i spent on this deal.the guys thinking a 700 hp car is cheap are just clueless.The ones tuneg up on stock bottom ends are just driving around on a grenade.I have been at the boost game for four years and have learned a thing or three.
Cheap is not cheap!!and the parts for these cars are on the way up because of all the international exports.A 03 is legal for Mexico this January so the Z06's they will start to fly out of the country.For now it seems there are more buyer that want stock so???

Mike

z06 vett

OOPS

Mike

z06 vett

REVISED

I have decided to go back to stock so I can change cars,
Ptk style twin set up with all the adds.I will trade for stock parts and will intertane offers to swap at my shop.I can dyno tune when completed.

I will be needing :GOT IT ALL !!!!!

a complete cooling system with condenser.

air box,washer bottle,egr system,injectors,coil brackets and hardware ,plug wires,hood light, hood light, ABS bracket.rear o2's,manifolds,egr sys,left side pillar cover,miscellaneous hardware.


GOT IT ALL !!!!!!!!!!



PARTS I have for sale :

Excedy twin core w/kit fly wheel,no cracks,blued a bit, service able-350-sold

McLeod original twin original w/alum fly wheel-Borge and beck pressure plate~4000 miles?-1200hp-500- sold

*************************************nee ds resurfacing***************************** *
Fly wheel /Steel 32lb sfi with half 7/16 bolt holes for Pressure plate 3200 LB,double strapped
uses a single puck,i do not have, any on line will work sprung or not
this is rated to hold 750 ft lbs of torque with a Kevlar-ceramic style puck
offers-----------------------------------------------------------------------------SOLD
**************************************** **************************************** *******
Fab valve covers new in box-100,paid 125 but ?

Spectre werkes C5R head lights-500-traded-shipped-sold

aluminum under-garage protection bars-150-sold

Valve covers/Roberts racing,Billet dry sump w/oilier holes valve covers( set up for dry sump.They have a 4an port on each end to supply oil to the springs.They are like to 2 grand to buy new -500-sold

Siemines 60's injectors-325-sold 250shipped-sold

progressive meth kit/SMC,V2,trunk mount-200 -sold

1 nib LC1 wide band w/gauge-175-sold

1 lc1 used /no gauge-100-sold

moats blue LED gauge w/data logger, blue new-50

AEM dual wide band kit used-300-sold

catch can-RX-100-sold

pillar pod/04/,glow shift fuel pressure and vac/boost gauges-multi color,complete-200

manual boost controllerTurbo XS -75


Hardland Sharp roller rockers ,modified for stock covers-250-sold

**************************************** **************************************** **************************************** *********************************
```````````````````````````````````````` ````````````PTK style 1200 hp top mount turbo kit````````````````````````````````````` ```````````````````````````````````````` `````````
T3-T4 hybrid turbos ceramic coated on in side~10k miles
hot side pipes ported internally and left side flange modded for easy install
cold side pipes polished stainless steel
V clamps
1"oil riser block and feed lines
oil drain lines
Modified radiator carriage
Modified condenser w/extension
Ls1 style Howe race dual 1"core radiator/capless
custom alum. 1 gal surge tank w/ original plastic cap/for a 4 gallon capacity cooling system
2 fans,14"+16" spail style low profile /5000cfm /fans
Remote Battery kit-Summit Racing Fabricated Battery Box 890103-1 O solid cables both top mount battery style
air to air inter-cooler w/blow off welded on and alum.spoiler
ALL Blue silicone and clamps
Steel power steering reservoir
power steering bracket (ceramic coated)
abs bracket modified
Alternator relocate bracket
power steering reservoir,hoses,in f-body line cooler
coil relocate kit w 24 harness es and blue max custom wires
wind shield washer kit /remote under left fender
2 bar map sensor
and a bunch of misc.hardware and hoses

Let us say 3500
**************************************** **************************************** **************************************** ***********************************
progressive meth kit/SMC v2,trunk mount,modified for kit and tune(#7 nozzle, pressure gauge,remote LED's (yellow-red-green)in the traction control switch area -controller mounts in center console out off site,Really nice set up- 600-sold
**************************************** **************************************** **************************************** *********************************88

labonte fail safe used-75-sold

Msd fuel pump booster /Racetronics harness-175

Dte brace-250-SOLD-250 shipped sold

West cost C5R hood,rough cut for air flow,gel coat black-450-sold

ACI rear spoiler,yellow-350-sold

z06 rear partition divider-100

toyo proxies ra1，335-35-18/one pair new -500
**************************************** **************************************** **************************************** *******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~`THIS IS NOT A SHOW CAR!!!!!!!~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~

```````````````````````````````````````` ````````````````````````Car stock $26,500.00 or best offer``````````````````````````````````` ```````````````````````````````````````` ``````````
~36k miles~
It can have a little higher compression 347 ls6 motor with under 1000 miles

LS6 Engine;
Stock crank-Mallory weighted and balanced
ls6 cam new cam bearings
ls2 timing chain
high volume oil pump
king bearings
Scat 6.098" H beam rods ARP bolts, weighed +balanced
JE 883 pistons 2cc valve release (.016" top to deck)
Total seal rings straight from total seal for this ap
ARP studs top and bottom
ARP cam bolts
SLP under drive pulley
it will have the oil drain plug ged from turbo kit

Heads:
Has the CUSTOM turbo 317 heads but i am taking them off??
heads to be determined(probably 243 stockers?or what ever you want $$$$?
lifters, rockers ,rods, all from original motor
stock valve covers with coils back t

stock-stripped to seals-150

Texas speed 2.5 61cc installed with katech ported ls2 manafold w/ported TB.Bbk shorties, more!!!!

Drive line:
Fresh no mile MM12 ,ALL New--- bearings ,main shaft,bronze bushings , fifth gear synro and gear ,(was just a little worn so WTFhas all steel forks about a grand in parts

**************************************** ********Trans is out as i type so you can upgrade clucth?????~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~
Stock ls6 clutch kit,luke ?5k mile

Drive line:
both sides 300 m hardened shafts
12 mm rear alum. coupler
tick adjustable master cylinder
remote clutch bleeder
short shifter


Exhaust:
cat less H pipe with o2' pluged
Billy Boat route 66 cat back


Exterior:
Stewart Works hid head light kit (1500 new)( right side cover has small defect but it is 230 bucks to replace)
tail light extenders to keep dirt down
normal wear and tear ,
had rear fascia repainted,


Brakes:
drilled and slotted rotors
ceramic pads,near new
Remote brake bleeders on each caliber
stops great!!!!!!!!!!!

Interior:
still smells like leather
yellow/checkared flag console cover and shifter boot

TIRES:
toyo proxes on back near new 335/30/18( yes they fit and look fantastic)
fire stone wide ovals front 75%


Air box ? probably Vararam??speak up!!!



I do not have the ability to post up pics but you can look at my photo bucket links,can send more if you email me and ask .
i do not know how to post them

http://s195.photobucket.com/albums/z35/mikefoote2000/
http://s195.photobucket.com/albums/z35/mikefoote2001/

I am open to any offer's or idea's and any offers including trades
Mike

95wht6spd

What color is catch can? Is it a 3 line version? How old is it?

vr4z06

"McLeod original twin original w/alum fly wheel-Borge and beck pressure plate~4000 miles?-1200hp-500"
Good shape, usable or need new friction discs?Pics?
thanks,
Larry
vr4rieders@aol.com

z06 vett

silver 3 line
yes it works great .i have a couple of others as well but they do not have check valves

z06 vett

ill double check tomorrow,
but last time i re shimed it they were @.110/.120

i would just use it.It held good enough to break my trans main shaft in second

i was going to go auto conversion? but i am changing to a coupe auto that is not as nice of a car.
thanks,
mike

z06 vett

2004 z06 36k mile way better than stock
REVISED

I have decided to go back to stock so I can change cars,
Ptk style twin set up with all the adds.I will trade for stock parts and will intertane offers to swap at my shop.I can dyno tune when completed.

I will be needing :

a complete cooling system with condenser.

air box,washer bottle,egr system,injectors,coil brackets and hardware ,plug wires,hood light, hood light, ABS bracket.rear o2's,manifolds,egr sys,left side pillar cover,miscellaneous hardware.

PARTS I have for sale :

Excedy twin core w/kit fly wheel GT01SD,no cracks,blued a bit, service able-350

McLeod original twin original w/alum fly wheel-Borge and beck pressure plate~4000 miles?-1200hp-500

*************************************nee ds resurfacing***************************** *
Fly wheel /Steel 32lb sfi with half 7/16 bolt holes for Pressure plate 3200 LB,double strapped
uses a single puck,i do not have, any on line will work sprung or not
this is rated to hold 750 ft lbs of torque with a Kevlar-ceramic style puck
offers
**************************************** **************************************** *******
Fab valve covers new in box-100

Valve covers/Roberts racing,Billet dry sump w/oilier holes valve covers-500

Siemines 60's injectors-325

progressive meth kit/SMC,V2,trunk mount-200

1 nib LC1 wide band w/gauge-175

1 lc1 used /no gauge-100

moats blue LED gauge w/data logger, blue new-50

AEM dual wide band kit used-300

catch can-RX-100

pillar pod/04/,glow shift fuel pressure and vac/boost gauges-multi color,complete-200

manual boost controller (Turbo XS ?-75)


Hardland Sharp roller rockers ,modified for stock covers-250

**************************************** **************************************** **************************************** *********************************
```````````````````````````````````````` ````````````PTK style 1200 hp top mount turbo kit````````````````````````````````````` ```````````````````````````````````````` `````````
T2-T4 turbos ceramic coated on in side~10k miles
hot side pipes ported internally and left side flange modded for easy install
cold side pipes polished stainless steel
V clamps
1"oil riser block and feed lines
oil drain lines
Modified radiator carriage
Modified condenser w/extension
Ls1 style Howe race dual 1"core radiator/capless
custom alum. 1 gal surge tank w/ original plastic cap/for a 4 gallon capacity cooling system
2 fans,14"+16" spail style low profile /5000cfm /fans
Remote Battery kit-Summit Racing Fabricated Battery Box 890103-1 O solid cables both top mount battery style
air to air inter-cooler w/blow off welded on and alum.spoiler
ALL Blue silicone and clamps
Steel power steering reservoir
power steering bracket (ceramic coated)
abs bracket modified
Alternator relocate bracket
power steering reservoir,hoses,in f-body line cooler
coil relocate kit w 24 harness es and blue max custom wires
wind shield washer kit /remote under left fender
2 bar map sensor

ALL or part ? not sure
**************************************** **************************************** **************************************** ***********************************
progressive meth kit/SMC v2,trunk mount,modified for kit and tune(#7 nozzle, pressure gauge,remote LED's (yellow-red-green)in the traction control switch area -controller mounts in center console out off site,Really nice set up- 600
**************************************** **************************************** **************************************** *********************************88

labonte fail safe used-75

Msd fuel pump booster /Racetronics harness-175

Dte brace-250

West cost C5R hood,rough cut for air flow,gel coat black-450

ACI rear spoiler,yellow-350

z06 rear partition divider-100

toyo proxies ra1，335-35-18/one pair new -500
**************************************** **************************************** **************************************** *******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~`THIS IS NOT A SHOW CAR!!!!!!!~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~

```````````````````````````````````````` ````````````````````````Car stock $24000 or best offer``````````````````````````````````` ```````````````````````````````````````` ``````````
~36k miles~
It can have a little higher compression 347 ls6 motor with under 1000 miles

LS6 Engine;
Stock crank-Mallory weighted and balanced
ls6 cam new cam bearings
ls2 timing chain
high volume oil pump
king bearings
Scat 6.098" H beam rods ARP bolts, weighed +balanced
JE 883 pistons 2cc valve release (.016" top to deck)
Total seal rings straight from total seal for this ap
ARP studs top and bottom
ARP cam bolts
SLP under drive pulley
it will have the oil drain plug ged from turbo kit

Heads:
Has the CUSTOM turbo 317 heads but i am taking them off??
heads to be determined(probably 243 stockers?or what ever you want $$$$?
lifters, rockers ,rods, all from original motor
stock valve covers with coils back to stock

Drive line:
Fresh no mile MM12 ,ALL New--- bearings ,main shaft,bronze bushings , fifth gear synro and gear ,(was just a little worn so WTFhas all steel forks about a grand in parts

**************************************** ********Trans is out as i type so you can upgrade clucth?????~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~
Stock ls6 clutch kit,luke ?5k mile

Drive line:
both sides 300 m hardened shafts
12 mm rear alum. coupler
tick adjustable master cylinder
remote clutch bleeder
short shifter


Exhaust:
cat less H pipe with o2' pluged
Billy Boat route 66 cat back


Exterior:
Stewart Works hid head light kit (1500 new)( right side cover has small defect but it is 230 bucks to replace)
tail light extenders to keep dirt down
normal wear and tear ,
had rear fascia repainted,


Brakes:
drilled and slotted rotors
ceramic pads,near new
Remote brake bleeders on each caliber
stops great!!!!!!!!!!!

Interior:
still smells like leather
yellow/checkared flag console cover and shifter boot

TIRES:
toyo proxes on back near new 335/30/18( yes they fit and look fantastic)
fire stone wide ovals front 75%


Air box ? probably Vararam??speak up!!!



I do not have the ability to post up pics but you can look at my photo bucket links,can send more if you email me and ask .
i do not know how to post them

http://s195.photobucket.com/albums/z35/mikefoote2000/
http://s195.photobucket.com/albums/z35/mikefoote2001/

I am open to any offer's or idea's

mike
251-490-8806

dmaleck

I have some stock manifolds if your interested. Maybe trade for something or buy them outright? Let me know, Thanks

z06 vett

i am waiting on a call back from a guy in Florida,
he has all of it .
thanks
mike

vr4z06

Guesstimate of life left base on friction material left?
Pics?

z06 vett

best guess is ~80%

they come at .125" new

a rebuild cost 400 bucks completely restored to new .I would use it for a while first.I was facing a ceramic upgrade(600) or an Auto convert(4500).I will just sell off and by a auto coupe.I have a really big single on a all cast iron 5.3 in mind like 30#'s boost, Solid axle.??

daniel540

Do you still have z06 rear partition divider

z06 vett

sure do

AS10TRK

I assume the DTE brace is for standard shift car? If you will include shipping to 75082 for the $250.00 I can send you Pay Pal if that is ok. Thanks. Alan

1999vettec5

I have some stock parts for sale https://www.corvetteforum.com/c5-par...-for-sale.html

z06 vett

thanks but i am supposed to get all of it from one guy for a price
mike

mig1980

Can you send me more info of the pillar pod and gauges via pm. Thank you

18dsf

MIke, this is Gary in alexandria, LA. I am interested in the hood. How well does it fit on car? Also how much to put turbo kit on my stock vette?

z06 vett

It actually fits good ,
call me latter tonight and will talk a deal.

mike