C5 Carbon Fiber Door Sills in Stock and On Sale!!!
04-28-2011, 09:58 AM
#1
Former Vendor
Thread Starter
C5 Carbon Fiber Door Sills in Stock and On Sale!!!
On Sale for $135 Shipped!
- Made From Real Carbon Fiber - 6X Twill
- Clear coated for extra Protection
- Includes Both Driver and Passenger Side Door Sills
- Attaches with 3M Tape for easy Installation
For More Information and Ordering please click the link :
http://www.pinnaclecorvette.com/C5_C...p/cf-c5101.htm
- Made From Real Carbon Fiber - 6X Twill
- Clear coated for extra Protection
- Includes Both Driver and Passenger Side Door Sills
- Attaches with 3M Tape for easy Installation
For More Information and Ordering please click the link :
http://www.pinnaclecorvette.com/C5_C...p/cf-c5101.htm
04-29-2011, 11:50 AM
#6
Former Vendor
Thread Starter
[QUOTE=$$$frumnuttin';1577477425]thanks, how difficult to remove later? would the CF break apart trying to lift it?[/QUOTE
Their applied with 3M tape so the best method would be is to apply Adhesive Remover to the tape area to loosen the bond between the door sill and plate. The carbon is pretty strong, but if you just tried pulling them off it would bend the carbon door sill. Hope that helps
Their applied with 3M tape so the best method would be is to apply Adhesive Remover to the tape area to loosen the bond between the door sill and plate. The carbon is pretty strong, but if you just tried pulling them off it would bend the carbon door sill. Hope that helps
04-29-2011, 02:32 PM
#7
Tech Contributor
Member Since: Aug 1999
Location: Should this thoughtful, valuable contribution meet with no acknowledgement or 'thanks' this post----
Posts: 16,382
Received 399 Likes
on
257 Posts
ok, I see...I have some low bond tape that would work best...I'll let you know. Once you make up a torch red I would also like to see a closeup pic for color and pattern...I need to match my Hydro items as closely as possible.
05-01-2011, 04:13 PM
#8
Former Vendor
Thread Starter
05-10-2011, 11:44 AM
#14
Former Vendor
Thread Starter
awesome..thanks for the order, will email you with shipping info. Have a good one!
05-11-2011, 09:08 PM
#17
Former Vendor
Thread Starter
You can do either, but you will have to clean the surface before applying to make sure they adhere to the surface.
Some customers don't like pulling the stock ones off and from my experience they leave a sticky mess. So if you are going to leave them on, just clean them really good before applying. Hope that helps.
