HUGE C5 Z06 Track Stuff Partout- F1's, rims/tires, G2x timer, pads, cameras, trailer!
#9
It is an awesome track accessory. I used to carry extra pads, small tent, paper towels/rags, jack stands, jack, tool box... and lots of other tidbits. It also served as a nice flat surface inside to tape the track session list to and on top - a great lunch table!
you wont find another one like that to carry z06 tires. I had to have the front arm specially welded to fit the z06 rim. That normally isn't on the trailer. also, it is designed such that a rope lock locks all the wheels once the tires are in place with a trailer hitch lock (included).
you wont find another one like that to carry z06 tires. I had to have the front arm specially welded to fit the z06 rim. That normally isn't on the trailer. also, it is designed such that a rope lock locks all the wheels once the tires are in place with a trailer hitch lock (included).
#11
The hitch is on the car and I was thinking of just selling the car with it. Want to make an offer and ill see if its worth the effort to remove? It might be a pita to ship.. Its a drawtite one..
#15
I just wanted to add some stuff about the tire trailer. I've gotten a few PMs about it.
Ok. You wont find a better designed one, keep this in mind! There was welding work that went into it. A plate was welded on the bottom for the spare trailer tire (included) and the front arm that holds the fourth z06 rim. I had to pay a professional welder for this customization because there was no other safe way to hold the large z06 tires - they dont fit 4-across like other people's tire trailers that you may have seen. The truck box is a high quality Tractor Supply Company ($250) and water tight, and it has a sliding tool tray inside.
I'll throw in the hitch and hitch ball and locking pins. Also the extra trailer bearings and hub. I bought this stuff and maintained the bearings to make sure I didnt get stuck out in the middle of no where. I repacked the bearings before each trip. The trailer operates perfectly and is ready to go.
I'll also throw in a couple ratchet straps that you'll need to keep the rear tires from bouncing around.
I'm particularly proud of how the tires get secured - one security rope (1/2" thick - rubber shroud) goes through the three rear tires, and then get secured underneath the front rim with a locking trailer hitch lock, which at the same time locks the front rim - very secure for those sketchy away events.
The only other thing you'll need is the trailer hitch receiver and 4-pole light wiring kit, which are available from etrailer.com for about $140. http://www.etrailer.com/pc-H~24658.h...icleid=2004272
Ok. You wont find a better designed one, keep this in mind! There was welding work that went into it. A plate was welded on the bottom for the spare trailer tire (included) and the front arm that holds the fourth z06 rim. I had to pay a professional welder for this customization because there was no other safe way to hold the large z06 tires - they dont fit 4-across like other people's tire trailers that you may have seen. The truck box is a high quality Tractor Supply Company ($250) and water tight, and it has a sliding tool tray inside.
I'll throw in the hitch and hitch ball and locking pins. Also the extra trailer bearings and hub. I bought this stuff and maintained the bearings to make sure I didnt get stuck out in the middle of no where. I repacked the bearings before each trip. The trailer operates perfectly and is ready to go.
I'll also throw in a couple ratchet straps that you'll need to keep the rear tires from bouncing around.
I'm particularly proud of how the tires get secured - one security rope (1/2" thick - rubber shroud) goes through the three rear tires, and then get secured underneath the front rim with a locking trailer hitch lock, which at the same time locks the front rim - very secure for those sketchy away events.
The only other thing you'll need is the trailer hitch receiver and 4-pole light wiring kit, which are available from etrailer.com for about $140. http://www.etrailer.com/pc-H~24658.h...icleid=2004272