Retiring Today, and have a boat load.............
#1
mike v
Thread Starter
Retiring Today, and have a boat load.............
Retiring Today, and have a boat load of goodies for the vette to play with..........
SO -- I have been collecting parts/goodies for the past year for my 01 coupe. Starting Monday 1/4/16 Will be doing the following;
Adding; sound/heat kit to my interior, and repairing driver seat. The foam on the left side has pushed my seat controller out of place..
Adding Headers; Hines 1 7/8" coated including X pipe. Purchased the full set all the way back, plus a new High Flow 3" KATs.. Have Borla Touring already. Also have new GM Ex. Gaskets..
Next will be; C5 Z06 leaf springs, 2013 C6Z06 Shocks, c6Z06-Z51 Sway bars and metal end links.
New Brake Pads, even though it doesn't need them. Being its apart that far...
Then upgrading/ adding a Ported & polished T.B. From Bill Curlee
Will be sending The ECM/PCM to be tuned also..
So far this year I have added a Catch Can, Twin Cones Air Breather system, Big 3 charging system upgrade, Loyd's Floor Mats, polished
Stainless Screws-(hood, trunk, and Door) area's.
Any Way,,,,,,,, Just thought I would share.....
AND,, Thanks to all the CF members and Vendor's for all your help in 2015.
Hoping Every one had a good Christmas, And Have A GREAT New Year..
Be Safe,,
mike venth
SO -- I have been collecting parts/goodies for the past year for my 01 coupe. Starting Monday 1/4/16 Will be doing the following;
Adding; sound/heat kit to my interior, and repairing driver seat. The foam on the left side has pushed my seat controller out of place..
Adding Headers; Hines 1 7/8" coated including X pipe. Purchased the full set all the way back, plus a new High Flow 3" KATs.. Have Borla Touring already. Also have new GM Ex. Gaskets..
Next will be; C5 Z06 leaf springs, 2013 C6Z06 Shocks, c6Z06-Z51 Sway bars and metal end links.
New Brake Pads, even though it doesn't need them. Being its apart that far...
Then upgrading/ adding a Ported & polished T.B. From Bill Curlee
Will be sending The ECM/PCM to be tuned also..
So far this year I have added a Catch Can, Twin Cones Air Breather system, Big 3 charging system upgrade, Loyd's Floor Mats, polished
Stainless Screws-(hood, trunk, and Door) area's.
Any Way,,,,,,,, Just thought I would share.....
AND,, Thanks to all the CF members and Vendor's for all your help in 2015.
Hoping Every one had a good Christmas, And Have A GREAT New Year..
Be Safe,,
mike venth
The following users liked this post:
mike venth (12-31-2015)
The following users liked this post:
mike venth (12-31-2015)
#4
Racer
Retiring Today, and have a boat load of goodies for the vette to play with..........
SO -- I have been collecting parts/goodies for the past year for my 01 coupe. Starting Monday 1/4/16 Will be doing the following;
Next will be; C5 Z06 leaf springs, 2013 C6Z06 Shocks, c6Z06-Z51 Sway bars and metal end links.
SO -- I have been collecting parts/goodies for the past year for my 01 coupe. Starting Monday 1/4/16 Will be doing the following;
Next will be; C5 Z06 leaf springs, 2013 C6Z06 Shocks, c6Z06-Z51 Sway bars and metal end links.
Just a thought, if you are buying new leaf springs and shocks, why not upgrade to coilovers. One of the best mods for our C5's, and you get to remove the old technology, crappy leaf springs.
The following users liked this post:
mike venth (12-31-2015)
#5
1/4 mile/AutoX
Happy Retirement !!!!!!! and your next non-pay job the Vette !!!!!!
The following users liked this post:
mike venth (12-31-2015)
#6
mike v
Thread Starter
Thanks... Had considered that, but I have been saving up, get a couple parts then save again...Have been working with Bill C on some of the projects... With limited funds, best bang for spacing it out..
#7
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 343,478
Received 19,447 Likes
on
14,053 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Congrats on your retirement, but from the sounds of it, it looks like you will be very busy with the car.
The following users liked this post:
mike venth (01-04-2016)
The following users liked this post:
mike venth (12-31-2015)
#9
Burning Brakes
Congrats on your retirement. Sounds like a good list of stuff to do. Keep us updated on your progress. Are you planning on getting a tune after installing the headers?
The following users liked this post:
mike venth (12-31-2015)
#10
mike v
Thread Starter
The following users liked this post:
mike venth (12-31-2015)
#12
mike v
Thread Starter
#13
Pro
I went into semi-retirement mode in 2000 after 20yrs with SkyWest Airlines. Did some lease back stuff with a couple flight schools for 5 years and then decided to move to a place with a little slower paced life style than California. Didn't work for 5 years, got bored and took a job at the local NAPA store, still there but I think I am going to slow down in 2016 and "smell the roses" as they say. Enjoy your retirement to its fullest, I am sure you earned it. Mike
The following users liked this post:
mike venth (01-04-2016)
#14
1/4 mile/AutoX
I have been retired for 5 years, the last two winters (with the vette) I worked on mine almost everyday, so much fun !!!!
The following users liked this post:
mike venth (01-04-2016)
The following users liked this post:
mike venth (01-04-2016)
#16
Congratulation on retiring! I hope you have an enjoyable and exciting year playing with your toy!
The following users liked this post:
mike venth (01-04-2016)
#17
Burning Brakes
Congratulations on your Retirement. Enjoy the many days of doing exactly what you want to do :-)
The following users liked this post:
mike venth (01-04-2016)
#18
Team Owner
Member Since: Sep 2002
Location: Bonita Springs, Florida
Posts: 22,000
Received 3,071 Likes
on
2,043 Posts
Enjoy your retirement and your '01 Corvette.
The following users liked this post:
mike venth (01-04-2016)
The following users liked this post:
mike venth (01-04-2016)
#20
Melting Slicks
Member Since: Nov 2008
Location: Edmonton Alberta, Canada
Posts: 3,146
Received 201 Likes
on
168 Posts
Congratulations on your retirement that I am sure is well earned. Big life change for sure. Looks like your Corvette will keep you busy into the next decade, lol Keep us posted on your progress. PS Happy New Year too!
Last edited by El original; 12-31-2015 at 10:57 PM.
The following users liked this post:
mike venth (01-04-2016)