Replacement Air Dam Recommendations
04-21-2014, 07:44 PM
#1
Pro
Thread Starter
Replacement Air Dam Recommendations
Can anyone recommend a vendor for a replacement C5 air dam?
I am planning on trimming mine about an inch so as to minimize the "dam" scrapping everywhere!
Thanks
I am planning on trimming mine about an inch so as to minimize the "dam" scrapping everywhere!
Thanks
Last edited by Vette_DD; 04-21-2014 at 10:42 PM. Reason: Link to a non-supporting vendor
04-21-2014, 09:14 PM
#2
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,739
Received 19,234 Likes
on
13,933 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Here you go:
http://www.corvettemods.com/C5-Corve...IT_p_5059.html
I bought some of the reinforcement pieces for my front air dam. Got them from RPI Designs.
http://www.corvettemods.com/C5-Corve...IT_p_5059.html
I bought some of the reinforcement pieces for my front air dam. Got them from RPI Designs.
04-21-2014, 09:51 PM
#3
Drifting
Member Since: Apr 2006
Location: Redding California
Posts: 1,936
Likes: 0
Received 13 Likes
on
12 Posts
The reinforcement pieces are definitely worth buying, they firm up the side pieces nicely.
I don't think I would recommend cutting an inch off your air dam, I believe it is carefully designed to provide the best aerodynamic air flow for cooling.
The middle section of the air dam is spring loaded, so minor scraping is not that detrimental, but a little care at dips/bumps can avoid scraping altogether.
.
I don't think I would recommend cutting an inch off your air dam, I believe it is carefully designed to provide the best aerodynamic air flow for cooling.
The middle section of the air dam is spring loaded, so minor scraping is not that detrimental, but a little care at dips/bumps can avoid scraping altogether.
.
05-02-2014, 10:29 AM
#5
Safety Car
I bought the 3-piece replacement set with reinforcements from Corvette Mods.
I'm happy with the outer pieces and the reinforcements.
The center piece -not so much. The metal bracket didn't fit like the original and the replacement plastic was more flimsy than the OEM piece. I used some of the hardware that came with the aftermarket center piece to rebuild my OEM center piece, which I'm still using.
I'm happy with the outer pieces and the reinforcements.
The center piece -not so much. The metal bracket didn't fit like the original and the replacement plastic was more flimsy than the OEM piece. I used some of the hardware that came with the aftermarket center piece to rebuild my OEM center piece, which I'm still using.
05-02-2014, 02:05 PM
#6
My car is stock height, and I enter and leave my driveway at pretty sharp angles, but I STILL scrape every time. It's worse when I'm leaving the driveway. I'd lower my car tomorrow if I could find a way around this issue.