Victor has left corvette houston
10-01-2013, 04:11 PM
#1
Safety Car
Thread Starter
Victor has left corvette houston
Vic quit corvette world houston (or what ever their name is this month)
and is now working at 510 race engineering. Vic worked over there as their lead tech for 11 years. he was the only one there i and many of you would ever trust to work on our cars.
i talked with Vic yesterday his plans are to open his own shop in the next few months or so. but right now is excited to be working at 510 in tomball.
im certainly glad to see him away from there and happy. i know where my car will be going for anything i need done.
and is now working at 510 race engineering. Vic worked over there as their lead tech for 11 years. he was the only one there i and many of you would ever trust to work on our cars.
i talked with Vic yesterday his plans are to open his own shop in the next few months or so. but right now is excited to be working at 510 in tomball.
im certainly glad to see him away from there and happy. i know where my car will be going for anything i need done.
10-01-2013, 07:09 PM
#2
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,707
Received 19,233 Likes
on
13,933 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Good for Vic - sometimes you just have to make a change to be happy.
10-01-2013, 07:16 PM
#3
Safety Car
That's great news Matt .....
Vic quit corvette world houston (or what ever their name is this month)
and is now working at 510 race engineering. Vic worked over there as their lead tech for 11 years. he was the only one there i and many of you would ever trust to work on our cars.
i talked with Vic yesterday his plans are to open his own shop in the next few months or so. but right now is excited to be working at 510 in tomball.
im certainly glad to see him away from there and happy. i know where my car will be going for anything i need done.
and is now working at 510 race engineering. Vic worked over there as their lead tech for 11 years. he was the only one there i and many of you would ever trust to work on our cars.
i talked with Vic yesterday his plans are to open his own shop in the next few months or so. but right now is excited to be working at 510 in tomball.
im certainly glad to see him away from there and happy. i know where my car will be going for anything i need done.
10-01-2013, 07:50 PM
#4
Le Mans Master
Victor was kind enough to tell me there was no way to work me in for a tune after supercharging it a month or 2 ago. He was an honest guy about the situation. I went to KP Racing instead.
10-01-2013, 09:08 PM
#5
Former Vendor
10-01-2013, 10:51 PM
#7
Le Mans Master
It's a heck of a ride now! I couldn't be happier!!! I did remove that fuel line restriction so it's got a little more on the top end now. Also fixed the fuel sending unit and everything is fantastic. Took Joe's advice and rerouted the oil cap breather line and made another filter to stop it from dumping directly into the air filter.
You guys rock, and I still can't believe how Jesse kept that shop floor so clean.
Later next year the forged bottom end goes in and I'll pulley down and run more boost and Joe will have to tune it again.
Best money I ever spent was in your shop!
Edited, I really like the facebook page you have and all the dyno pulls you guys post!!!!! Awesome cars and great results from your tunes.
You guys rock, and I still can't believe how Jesse kept that shop floor so clean.
Later next year the forged bottom end goes in and I'll pulley down and run more boost and Joe will have to tune it again.
Best money I ever spent was in your shop!
Edited, I really like the facebook page you have and all the dyno pulls you guys post!!!!! Awesome cars and great results from your tunes.
Last edited by sfc rick; 10-01-2013 at 10:54 PM.