You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Corvetteforum.com today!
My first "ricer" mod ever on a car, I decided to try something subtle w/ my Z06. A set of matte black GS stripes from CorvetteMods on both driver and passenger sides. Figured it would be unique (as far as GS stripes go...) but not too glaring or out of place.
I had a hard time coming up with exactly where to position them, this seems maybe a little further back toward the door than some others have placed them, but this seemed about where the rounded cut on the bottom of the rear stripe lined up best w/ the curve of the wheelwell. The front stripes seem to be straight cut on both ends and intended to be trimmed both to match the wheelwell and the top of the fender/hood opening, so they weren't much help in proper placement...
I used a strip of 3/4" I think masking tape as a spacer between each stripe to get them aligned/spaced out easily. That worked great, I'm happy with placement.