Happy Friday (Photo Shoot)
The following 6 users liked this post by Chris Draper:
black match box (12-15-2019),
boostedfury (12-15-2019),
Dave in Pa (12-13-2019),
friou (01-12-2020),
realvc (12-14-2019),
and 1 others liked this post.
Popular Reply
12-16-2019, 04:18 PM
Instructor
Exactly what I would expect you to say. So because I haven't been here as long as you what exactly? Your stale opinion matters? It only matters to people who think exactly like you. And how boring is that. Variety is the spice of life, yet you're trashing on anything that doesn't fit your narrow mindset.
You're a waste of time.
You're a waste of time.
The following users liked this post:
Chris Draper (12-16-2019)
The following users liked this post:
Chris Draper (12-16-2019)
#4
Melting Slicks
You sure you have the right offset for the rear? Looks like they are past the fender like crazy. May just be the angle. Either that or you need the wide fender conversion to match those wheels. The fifth picture almost shows the entire width of the tire.
Last edited by STRMLNE; 12-13-2019 at 12:51 PM.
#6
Drifting
Thread Starter
#8
Drifting
Thread Starter
Those are new wheels. No spacers. The tire pokes maybe 1/4" at the top. It looks like more because there is no splash guard on the back so there is a lot of exposed tire.
Last edited by Chris Draper; 12-13-2019 at 12:58 PM.
#10
Are you sure they only poke by 1/4"...? I'm with STRMLNE, it looks like they're way out past the fender flare. But it may just be the angle? Any direct rear shots?
#11
Melting Slicks
Can you still return the rears? I think they messed up. With wide fenders these shouldn’t stick out that much. Unless you’re turning this into a drag car with forced induction and nos those rear tires are obnoxious.
#13
Instructor
I've been following your channel and like what you've done and appreciate all the how-tos. But to go through all the trouble and expense, especially since I'm pretty sure those wheels are built to order - I think they should be perfectly flush with the extended fender edge. If you are happy with the results, then never mind me
I think many of us are bitter because our cars are put away for the season.
I think many of us are bitter because our cars are put away for the season.
#14
Melting Slicks
What channel? YouTube? Yeah I agree. I mean you went through the trouble of doing wide fenders, why not get the appropriate wheels? I’m not one for the low rider potruding wheel look but to each their own.
#15
Agreed. If you paid the price for brand new custom wheels, they should not be sticking out AT ALL unless you requested them that way or you personally supplied bad measurements. Buying used wheels that don't fit perfect is a different story. There's no way in h*** I'd accept ill fitting wheels if I paid the price for a custom set up.
#16
Melting Slicks
Agreed. If you paid the price for brand new custom wheels, they should not be sticking out AT ALL unless you requested them that way or you personally supplied bad measurements. Buying used wheels that don't fit perfect is a different story. There's no way in h*** I'd accept ill fitting wheels if I paid the price for a custom set up.
#17
Le Mans Master
All the answers to all the questions:
#18
Drifting
Member Since: Jul 2011
Location: Boise, ID
Posts: 1,589
Received 377 Likes
on
187 Posts
2022 C5 of the Year Finalist - Modified
2021 C5 of the Year Finalist - Modified
C5 of Year Finalist (appearance mods) 2019
I think this is the look Chris was going for I happen to find the wheels and offset quite tasteful...
The following 2 users liked this post by tommypenguin:
boostedfury (12-15-2019),
Chris Draper (12-16-2019)
#19
Drifting
Your youtube video answers all these questions very well. I am now a subscriber to your youtube channel.
You got your wheels the way you want them and you are happy with the look, the fit and the results all the way around.
I'm for doing what ever makes you the owner happy.
My vette is done the way I like it.
Vince
You got your wheels the way you want them and you are happy with the look, the fit and the results all the way around.
I'm for doing what ever makes you the owner happy.
My vette is done the way I like it.
Vince
Last edited by realvc; 12-14-2019 at 10:30 AM.
The following users liked this post:
Chris Draper (12-15-2019)
#20
Instructor
I have been following Chris for awhile now, this is the look he wanted for his personal choice as stated in the video. everyone like different things. I go to shows and watch different videos for ideas and appreciate good how to videos Chris makes for the common person. Thanks Chris and keep it up. I will post my project C5 when it comes out of winter hibernation. Waiting for a load of parts to take to the body shop and paint.
The following 3 users liked this post by Drice0217: