SS DNA

Who has the best prices ? Im ready to buy some 52 inchers

0Fred@ReverseLogic

Update: February 2014. Reverse Logic no longer "follows" other resellers with Competitive Price Matching. Instead, for nearly a year now, other resellers will have to match our 10% Store-Wide discounts (minimum order $200) if they want to offer the best prices on Race Ramps.

*********************

We are currently running a Competitive Price Match sale on the one and two piece 56" and 67" Race Ramps.

http://www.reverselogic.us/ReverseLo.../Specials.html

If you place an order by 31-Mar-2012 you will qualify for a free set of Race Ramps wheel chocks too. If you get the ramps from Reverse Logic at least $10 from the sale of each ramp goes to sponsoring Corvette Forum.

SS DNA

Im going to pick up the 56''

Stomp'N'Go

What length ramps with the 10" height would work best with my lowered Vette?

0Fred@ReverseLogic

Actually, we have 10" high ramps that are 87" long. Scroll down a little further at the above link in post #2, or visit this page.

http://www.reverselogic.us/ReverseLo...ace_Ramps.html

The platform on the RLL-87-2 ramp is 30" long and the incline section is 63" long. There is a 6" overlap where the two pieces interlock.

The initial incline on these ramps is 6.8˚. If you do the yardstick test on your car and the raised end is at least 5" off the ground, then these ramps will work.

If your car has very low ground clearance we also sell 89" and 99" ramps with an 8" high platform. If your car needs one of these ramps then chances are that 10" high would be too high to back up onto without scraping the front of the car on the pavement.

The RLL-87-2 ramps don't qualify for the official Race Ramps wheel chock rebate offer. But, if you order a set by 31-Mar-2012 we will throw in a pair of the RR-WC-2 wheel chocks with your order.

The RLL-87-2 ramps are in stock in both PA and MI.

SS DNA

Hey Fred,

How long would it take to get the ramps ?

0Fred@ReverseLogic

Orders received by 9:00am ET usually ship the same day. It takes about 4 business days to get to the West Coast from the factory in MI. For orders other than the West Coast, I am now shipping from Philadelphia.

0Fred@ReverseLogic

Here's a photo that compares the relative size of the two-stage incline 72" (left) and 87" (center) ramps with the standard 67" (right) constant slope ramps.

MT0911

I bought mine through Fred almost a year ago - They are great products!

Baldfart

Prices look good!!

0Fred@ReverseLogic

The factory rebate for a free pair of Race Ramps wheel chocks ends today. Today is also the last day that we are including a pair of wheel chocks with the RLL-72-2 and RLL-87-2 two-stage incline ramps. The Competitive Price Match special will probably run a little longer.

The next factory promotion which starts tomorrow will be a $25 rebate on all of the Race Ramps standard Trailer Ramps. We will also be offering a $25 discount on the trailer ramp adapters which work with our RLL-87-2 and RLL-89-2 incline sections.

3318C5

Looking at the 67" 2 piece....Decisions, decisions.....LOL

0Fred@ReverseLogic

Your car may be too low to clear the 67" ramps. You probably need the RLL-72-2 or RLL-87-2 ramps with an initial incline of 6.8 degrees. You can confirm this with the yardstick test described on other CF threads.